Topic: I just got Reshade/SweetFX working in OpenGL... (Read 145195 times)

Darkwind · « **Reply #36 on:** July 04, 2015, 03:02:19 PM »

Looking real good here! Thank you so much for sharing!

hadji4 · « **Reply #37 on:** July 05, 2015, 12:27:46 AM »

Quote from: bomberkiller on July 01, 2015, 05:18:50 PM

Quote
Any anti aliasing mode was not working on my GTX 970.
SMAA only makes all text ugly with spikes around it, but jagged lines on meshes and textures stay.
FXAA has no effect at all.

Hello Mike,

FSAA (x8) and AF (x4) works with my Nvidia 660GTX on my "Online Computer"!

Please watch under "Choose effects" the 4th line.

Hello hadji4,

try this:

Code: [Select]
/*-----------------------------------------------------------. / Description / '------------------------------------------------------------/ Game: Preset: SweetFX: v2.0 Preview 8 by CeeJay.dk API hook: Reshade by Crosire This is a preview release meant to allow users to beta test SweetFXs 2.0 new injector called ReShade. More features, bugfixes and performance optimizations will come before release. Hope you enjoy SweetFX and ReShade. - CeeJay.dk /*-----------------------------------------------------------. / Choose effects / '-----------------------------------------------------------*/ // Effects are listed in the order that they are applied. // Set to 1 for ON or 0 for OFF #define USE_ASCII 0 //[0 or 1] Ascii : Converts the image to Ascii-art. #define USE_CARTOON 0 //[0 or 1] Cartoon : "Toon"s the image. #define USE_SMAA 0 //[0 or 1] SMAA Anti-aliasing : Smoothens jagged lines using the SMAA technique. #define USE_FXAA 1 //[0 or 1] FXAA Anti-aliasing : Smoothens jagged lines using the FXAA technique. #define USE_EXPLOSION 0 //[0 or 1] Explosion : Scatters the pixels, making the image look fuzzy. #define USE_CA 0 //[0 or 1] Chromatic Aberration : Mimics the look of a cheap camera lens, by distorting the colors. #define USE_ADVANCED_CRT 0 //[0 or 1] Advanced CRT : Simulates an old CRT TV display. (has a very high performance cost) #define USE_PIXELART_CRT 0 //[0 or 1] PixelArt CRT : Scanlines for pixel art (high performance cost) #define USE_BLOOM 1 //[0 or 1] Bloom : Makes bright lights bleed their light into their surroundings (relatively high performance cost) #define USE_HDR 1 //[0 or 1] HDR : Not actual HDR - It just tries to mimic an HDR look (relatively high performance cost) #define USE_LUMASHARPEN 1 //[0 or 1] LumaSharpen : Sharpens the image. #define USE_LENS_DISTORTION 0 //[0 or 1] Cubic Lens Distortion : Distorts the lens cubicly. (WIP) #define USE_NOSTALGIA 0 //[0 or 1] Nostalgia : Remember when you played that game you always played on that first system of yours? You don't? Well here is a reminder. #define USE_LEVELS 0 //[0 or 1] Levels : Sets a new black and white point. This increases contrast but causes clipping. Use Curves instead if you want to avoid that. #define USE_TECHNICOLOR 0 //[0 or 1] TECHNICOLOR : Attempts to mimic the look of an old movie using the Technicolor three-strip color process (Techicolor Process 4) #define USE_TECHNICOLOR2 0 //[0 or 1] TECHNICOLOR 2 : Yet another Technicolor effect - not sure if this stays or not. Let me know if you like it. #define USE_DPX 0 //[0 or 1] Cineon DPX : Should make the image look like it's been converted to DXP Cineon - basically it's another movie-like look similar to technicolor. #define USE_MONOCHROME 0 //[0 or 1] Monochrome : Monochrome makes the colors disappear. #define USE_COLORMATRIX 0 //[0 or 1] Color Matrix : Allows color modification using a user-defined color matrix. #define USE_LIFTGAMMAGAIN 0 //[0 or 1] Lift Gamma Gain : Adjust brightness and color of shadows, midtones and highlights. #define USE_TONEMAP 0 //[0 or 1] Tonemap : Adjust gamma, exposure, saturation, bleach and defog. (may cause clipping) #define USE_VIBRANCE 0 //[0 or 1] Vibrance : Intelligently saturates (or desaturates if you use negative values) the pixels depending on their original saturation. #define USE_CURVES 0 //[0 or 1] Curves : Contrast adjustments using S-curves. #define USE_SEPIA 0 //[0 or 1] Sepia : Sepia tones the image. #define USE_VIGNETTE 0 //[0 or 1] Vignette : Darkens the edges of the image to make it look more like it was shot with a camera lens. May cause banding artifacts. #define USE_FILMGRAIN 0 //[0 or 1] Film Grain : Adds film grain to the image. #define USE_DITHER 0 //[0 or 1] Dither : Applies dithering to simulate more colors than your monitor can display. This lessens banding artifacts (mostly caused by Vignette) #define USE_BORDER 0 //[0 or 1] Border : Can be used to create letterbox borders around the image. #define USE_SPLITSCREEN 0 //[0 or 1] Splitscreen : Enables the before-and-after splitscreen comparison mode. (Only partially working right now) #define USE_TRANSITION 0 //[0 or 1] Transition : Shows a welcome screen and then transitions to the regularly scheduled programming #define USE_DEPTH 0 //[0 or 1] Depth : Enables the possibility to display the depth buffer - You will still need to toogle it on/off with (*) in-game #define USE_CUSTOM 0 //[0 or 1] Custom : Write your own shader by editing custom.h, and then enable it here. /*-----------------------------------------------------------. / Ascii settings / '-----------------------------------------------------------*/ #define Ascii_input_image 1 //[1 or 2] 1 = Color buffer, 2 = Depth buffer. #define Ascii_spacing 1 //[0 to 9] Determines the spacing between characters. I feel 1 to 3 looks best. #define Ascii_font 2 //[1 or 2] 1 = 5x5 font, 2 = 3x5 font #define Ascii_font_color float3(255, 255, 255) //[0 to 255, 0 to 255, 0 to 255] What color the font should be. In integer RGB colors. #define Ascii_background_color float3(0, 0, 0) //[0 to 255, 0 to 255, 0 to 255] What color the background should be. In integer RGB colors. #define Ascii_swap_colors 0 //Swaps the font and background color when you are too lazy to edit the settings above (I know I am) #define Ascii_invert_brightness 0 //[0 or 1] #define Ascii_font_color_mode 1 //[0 to 2] 0 = font_color, 1 = image color, 2 = colorized grayscale /*-----------------------------------------------------------. / SMAA Anti-aliasing settings / '-----------------------------------------------------------*/ #define SMAA_THRESHOLD 0.20 //[0.05 to 0.20] Edge detection threshold. If SMAA misses some edges try lowering this slightly. I prefer between 0.08 and 0.12. #define SMAA_DEPTH_THRESHOLD 0.100 //[0.001 to 0.100] Depth edge detection threshold. Same as above but for the depth edge detection. This can go insanely low and still look good. #define SMAA_MAX_SEARCH_STEPS 32 //[0 to 98] Determines the radius SMAA will search for aliased edges #define SMAA_MAX_SEARCH_STEPS_DIAG 6 //[0 to 16] Determines the radius SMAA will search for diagonal aliased edges #define SMAA_CORNER_ROUNDING 0 //[0 to 100] Determines the percent of antialiasing to apply to corners. 0 seems to affect fine text the least so it's the default. // -- Advanced SMAA settings -- #define SMAA_EDGE_DETECTION 2 //[1|2|3] 1 = Luma edge detection, 2 = Color edge detection, 3 = Depth edge detection #define SMAA_DIRECTX9_LINEAR_BLEND 0 //[0 or 1] Using DX9 HARDWARE? (software version doesn't matter) if so this needs to be 1 - If not, leave it at 0. //Enable this only if you use a Geforce 7xxx series or older card, or a Radeon X1xxx series or older card. // -- SMAA Predication settings -- #define SMAA_PREDICATION 0 //[0 or 1] Enables predication which uses BOTH the color and the depth texture for edge detection to more accurately detect edges. #define SMAA_PREDICATION_THRESHOLD 0.001 // Threshold to be used in the depth buffer. #define SMAA_PREDICATION_SCALE 2.0 // How much to scale the global threshold used for luma or color edge detection when using predication #define SMAA_PREDICATION_STRENGTH 0.4 // How much to locally decrease the threshold. // -- Debug SMAA settings -- #define SMAA_DEBUG_OUTPUT 0 //[0 to 4] 0 = Normal, 1 = edgesTex, 2 = blendTex, 3 = areaTex, 4 = searchTex - Only for troubleshooting. Users don't need to mess with this. /*-----------------------------------------------------------. / FXAA Anti-aliasing settings / '-----------------------------------------------------------*/ #define FXAA_QUALITY__PRESET 9 //[1 to 9] Choose the quality preset. 9 is the highest quality. #define fxaa_Subpix 0.000 //[0.000 to 1.000] Choose the amount of sub-pixel aliasing removal. Higher values makes the image softer/blurrier. #define fxaa_EdgeThreshold 0.166 //[0.000 to 1.000] Edge detection threshold. The minimum amount of local contrast required to apply algorithm. Similar to SMAA_THRESHOLD #define fxaa_EdgeThresholdMin 0.000 //[0.000 to 1.000] Darkness threshold. Pixels darker than this are not processed in order to increase performance. /*-----------------------------------------------------------. / Explosion settings / '-----------------------------------------------------------*/ #define Explosion_Radius 2.0 //[0.2 to 100.0] Amount of effect you want. /*-----------------------------------------------------------. / Chromatic Aberration settings / '-----------------------------------------------------------*/ #define Chromatic_shift float2(2.5,-0.5) //[-100.0 to 100.0, -100.00 to 100.0] Distance (X,Y) in pixels to shift the color components. //For a slightly blurred look try fractional values (.5) between two pixels. #define Chromatic_strength 1.0 //Adjust the strength of the effect. /*-----------------------------------------------------------. / Cartoon settings / '-----------------------------------------------------------*/ #define CartoonPower 1.5 //[0.1 to 10.0] Amount of effect you want. #define CartoonEdgeSlope 1.5 //[0.1 to 8.0] Raise this to filter out fainter edges. You might need to increase the power to compensate. Whole numbers are faster. /*----------------------------------------------------------. / Advanced CRT settings / '----------------------------------------------------------*/ #define CRTAmount 1.00 //[0.00 to 1.00] Amount of CRT effect you want #define CRTResolution 2.0 //[1.0 to 8.0] Input size coefficent (low values gives the "low-res retro look"). Default is 1.2 #define CRTgamma 2.2 //[0.0 to 4.0] Gamma of simulated CRT (default 2.2) #define CRTmonitorgamma 2.4 //[0.0 to 4.0] Gamma of display monitor (typically 2.2 is correct) #define CRTBrightness 1.2 //[1.0 to 3.0] Used to boost brightness a little. Default is 1.0 #define CRTScanlineIntensity 2.0 //[2.0 to 4.0] Scanlines intensity (use integer values preferably). Default is 2.0 #define CRTScanlineGaussian 1 //[0 or 1] Use the "new nongaussian scanlines bloom effect". Default is on #define CRTCurvature 1 //[[0 or 1] "Barrel effect" enabled (1) or off (0) #define CRTCurvatureRadius 2.0 //[0.0 to 2.0] Curvature Radius (only effective when Curvature is enabled). Default is 1.5 #define CRTCornerSize 0.0100 //[0.0000 to 0.0020] Higher values, more rounded corner. Default is 0.001 #define CRTDistance 2.00 //[0.00 to 4.00] Simulated distance from viewer to monitor. Default is 2.00 #define CRTAngleX 0.00 //[-0.20 to 0.20] Tilt angle in radians (X coordinates) #define CRTAngleY -0.15 //[-0.20 to 0.20] Tilt angle in radians (Y coordinates). (Value of -0.15 gives the 'arcade tilt' look) #define CRTOverScan 1.00 //[1.00 to 1.10] Overscan (e.g. 1.02 for 2% overscan). Default is 1.01 #define CRTOversample 0 //[0 or 1] Enable 3x oversampling of the beam profile (warning : performance hit) /*-----------------------------------------------------------. / Pixel Art CRT / '-----------------------------------------------------------*/ // -- Emulated input resolution -- #define PixelArtCRT_resolution_mode 1 //[1 or 2] 1 = Ratio, 2 = Fixed resolution #define PixelArtCRT_resolution_ratio (1.0/4.0) // #define PixelArtCRT_fixed_resolution float2(320.0,160.0) // // -- Hardness -- #define PixelArtCRT_hardScan -24.0 // Hardness of scanline : -8.0 = soft, -16.0 = medium #define PixelArtCRT_hardPix -24.0 // Hardness of pixels in scanline : -2.0 = soft, -4.0 = hard // -- Display warp -- #define PixelArtCRT_warp float2(1.0/64.0,1.0/24.0) // Display warp : 0.0 = none , 1.0/8.0 = extreme // -- Type of shadow mask -- #define PixelArtCRT_ShadowMask 3 // Type of shadow mask : 1 = Very compressed TV style shadow mask, 2 = Aperture-grille, 3 = Stretched VGA style shadow mask, 4 = VGA style shadow mask // -- Amount of shadow mask -- #define PixelArtCRT_maskDark 0.5 // #define PixelArtCRT_maskLight 1.5 // // -- Falloff shape -- #define PixelArtCRT_shape 3.0 // Falloff shape : 1.0 = exp(x), 1.25 = in between, 2.0 = gaussian, 3.0 = more square // -- Amp signal -- #define PixelArtCRT_overdrive 1.25 // /*-----------------------------------------------------------. / Bloom settings / '-----------------------------------------------------------*/ #define BloomThreshold 22.25 //[0.00 to 50.00] Threshold for what is a bright light (that causes bloom) and what isn't. #define BloomPower 1.446 //[0.000 to 8.000] Strength of the bloom #define BloomWidth 0.0142 //[0.0000 to 1.0000] Width of the bloom /*-----------------------------------------------------------. / HDR settings / '-----------------------------------------------------------*/ #define HDRPower 1.33 //[0.00 to 8.00] Strangely lowering this makes the image brighter #define radius2 0.87 //[0.00 to 8.00] Raising this seems to make the effect stronger and also brighter /*-----------------------------------------------------------. / LumaSharpen settings / '-----------------------------------------------------------*/ // -- Sharpening -- #define sharp_strength 0.95 //[0.10 to 3.00] Strength of the sharpening #define sharp_clamp 0.035 //[0.000 to 1.000] Limits maximum amount of sharpening a pixel recieves - Default is 0.035 // -- Advanced sharpening settings -- #define pattern 2 //[1|2|3|4] Choose a sample pattern. 1 = Fast, 2 = Normal, 3 = Wider, 4 = Pyramid shaped. #define offset_bias 1.0 //[0.0 to 6.0] Offset bias adjusts the radius of the sampling pattern. //I designed the pattern for offset_bias 1.0, but feel free to experiment. // -- Debug sharpening settings -- #define show_sharpen 0 //[0 or 1] Visualize the strength of the sharpen (multiplied by 4 to see it better) /*----------------------------------------------------------. / Notalgia settings / '----------------------------------------------------------*/ //Nothing here yet, but you will get to set the palette to use and toggle dithering, and maybe pixelate the image .. once the effect is done. //For now it just displays the image with a C64 palette /*----------------------------------------------------------. / Levels settings / '----------------------------------------------------------*/ #define Levels_black_point 16 //[0 to 255] The black point is the new black - literally. Everything darker than this will become completely black. Default is 16.0 #define Levels_white_point 235 //[0 to 255] The new white point. Everything brighter than this becomes completely white. Default is 235.0 //Colors between the two points will stretched, which increases contrast, but details above and below the points are lost (this is called clipping). // -- Debug settings -- #define Levels_highlight_clipping 0 //[0 or 1] Highlight the pixels that clip. Red = Some detail is lost in the highlights, Yellow = All detail is lost in the highlights, // Blue = Some detail is lost in the shadows, Cyan = All detail is lost in the shadows. /*-----------------------------------------------------------. / TECHNICOLOR settings / '-----------------------------------------------------------*/ #define TechniAmount 0.40 //[0.00 to 1.00] #define TechniPower 4.00 //[0.00 to 8.00] #define redNegativeAmount 0.88 //[0.00 to 1.00] #define greenNegativeAmount 0.88 //[0.00 to 1.00] #define blueNegativeAmount 0.88 //[0.00 to 1.00] /*-----------------------------------------------------------. / TECHNICOLOR 2 settings / '-----------------------------------------------------------*/ #define Technicolor2_Red_Strength 0.2 //[0.05 to 1.0] Color Strength of Red channel. Higher means darker and more intense colors. #define Technicolor2_Green_Strength 0.2 //[0.05 to 1.0] Color Strength of Green channel. Higher means darker and more intense colors. #define Technicolor2_Blue_Strength 0.2 //[0.05 to 1.0] Color Strength of Blue channel. Higher means darker and more intense colors. #define Technicolor2_Brightness 1.0 //[0.5 to 1.5] Brightness Adjustment, higher means brighter image. #define Technicolor2_Strength 1.0 //[0.0 to 1.0] Strength of Technicolor effect. 0.0 means original image. #define Technicolor2_Saturation 0.7 //[0.0 to 1.5] Additional saturation control since technicolor tends to oversaturate the image. /*-----------------------------------------------------------. / Cineon DPX settings / '-----------------------------------------------------------*/ #define Red 8.0 //[1.0 to 15.0] #define Green 8.0 //[1.0 to 15.0] #define Blue 8.0 //[1.0 to 15.0] #define ColorGamma 2.5 //[0.1 to 2.5] Adjusts the colorfulness of the effect in a manner similar to Vibrance. 1.0 is neutral. #define DPXSaturation 3.0 //[0.0 to 8.0] Adjust saturation of the effect. 1.0 is neutral. #define RedC 0.36 //[0.60 to 0.20] #define GreenC 0.36 //[0.60 to 0.20] #define BlueC 0.34 //[0.60 to 0.20] #define Blend 0.2 //[0.00 to 1.00] How strong the effect should be. /*------------------------------------------------------------. / Monochrome settings / '------------------------------------------------------------*/ #define Monochrome_conversion_values float3(0.21, 0.72, 0.07) //[0.00 to 1.00] Percentage of RGB to include (should sum up to 1.00) #define Monochrome_color_saturation 0.00 //[0.00 to 2.00] Percentage of saturation to keep. Default is 0.00 , values above 1.00 boost saturation above normal. /*-----------------------------------------------------------. / Color Matrix settings / '-----------------------------------------------------------*/ // Red Green Blue #define ColorMatrix_Red float3(0.817, 0.183, 0.000) //[0.00 to 1.00] How much of Red, Green and Blue the new red value should contain - Should sum to 1.000 if you don't wish to change the brightness #define ColorMatrix_Green float3(0.333, 0.667, 0.000) //[0.00 to 1.00] How much of Red, Green and Blue the new green value should contain - Should sum to 1.000 if you don't wish to change the brightness #define ColorMatrix_Blue float3(0.000, 0.125, 0.875) //[0.00 to 1.00] How much of Red, Green and Blue the new blue value should contain - Should sum to 1.000 if you don't wish to change the brightness #define ColorMatrix_strength 1.0 //Adjust the strength /*-----------------------------------------------------------. / Lift Gamma Gain settings / '-----------------------------------------------------------*/ #define RGB_Lift float3(1.000, 1.000, 1.000) //[0.000 to 2.000] Adjust shadows for Red, Green and Blue. #define RGB_Gamma float3(1.000, 1.000, 1.000) //[0.000 to 2.000] Adjust midtones for Red, Green and Blue #define RGB_Gain float3(1.000, 1.000, 1.000) //[0.000 to 2.000] Adjust highlights for Red, Green and Blue //Note that a value of 1.000 is a neutral setting that leave the color unchanged. /*-----------------------------------------------------------. / Tonemap settings / '-----------------------------------------------------------*/ #define Gamma 1.000 //[0.000 to 2.000] Adjust midtones. 1.000 is neutral. This setting does exactly the same as the one in Lift Gamma Gain, only with less control. #define Exposure 0.000 //[-1.000 to 1.000] Adjust exposure #define Saturation 0.000 //[-1.000 to 1.000] Adjust saturation #define Bleach 0.000 //[0.000 to 1.000] Brightens the shadows and fades the colors #define Defog 0.000 //[0.000 to 1.000] How much of the color tint to remove #define FogColor float3(0.00, 0.00, 2.55) //[0.00 to 2.55, 0.00 to 2.55, 0.00 to 2.55] What color to remove - default is blue /*-----------------------------------------------------------. / Vibrance settings / '-----------------------------------------------------------*/ #define Vibrance 0.15 //[-1.00 to 1.00] Intelligently saturates (or desaturates if you use negative values) the pixels depending on their original saturation. #define Vibrance_RGB_balance float3(1.00, 1.00, 1.00) //[-10.00 to 10.00,-10.00 to 10.00,-10.00 to 10.00] A per channel multiplier to the Vibrance strength so you can give more boost to certain colors over others /*-----------------------------------------------------------. / Curves settings / '-----------------------------------------------------------*/ #define Curves_mode 2 //[0|1|2] Choose what to apply contrast to. 0 = Luma, 1 = Chroma, 2 = both Luma and Chroma. Default is 0 (Luma) #define Curves_contrast 0.15 //[-1.00 to 1.00] The amount of contrast you want // -- Advanced curve settings -- #define Curves_formula 2 //[1|2|3|4|5|6|7|8|9|10|11] The contrast s-curve you want to use. //1 = Sine, 2 = Abs split, 3 = Smoothstep, 4 = Exp formula, 5 = Simplified Catmull-Rom (0,0,1,1), 6 = Perlins Smootherstep //7 = Abs add, 8 = Techicolor Cinestyle, 9 = Parabola, 10 = Half-circles. 11 = Polynomial split. //Note that Technicolor Cinestyle is practically identical to Sine, but runs slower. In fact I think the difference might only be due to rounding errors. //I prefer 2 myself, but 3 is a nice alternative with a little more effect (but harsher on the highlight and shadows) and it's the fastest formula. /*-----------------------------------------------------------. / Sepia settings / '-----------------------------------------------------------*/ #define ColorTone float3(1.40, 1.10, 0.90) //[0.00 to 2.55, 0.00 to 2.55, 0.00 to 2.55] What color to tint the image #define GreyPower 0.11 //[0.00 to 1.00] How much desaturate the image before tinting it #define SepiaPower 0.58 //[0.00 to 1.00] How much to tint the image /*-----------------------------------------------------------. / Daltonize settings / '-----------------------------------------------------------*/ #define Daltonize_type 1 //[1|2|3] Type of colorblindness. 1 = Protanopia (missing red spectrum), 2 = Deuteranopia (missing green spectrum), 3 = Tritanopia (missing blue spectrum) /*-----------------------------------------------------------. / Film Grain settings / '-----------------------------------------------------------*/ #define FilmGrain_intensity 0.50 //[0.00 to 1.00] How visible the grain is. Higher is more visible. #define FilmGrain_variance 0.40 //[0.00 to 1.00] Controls the variance of the gaussian noise. Lower values look smoother. #define FilmGrain_SNR 6 //[0 to 16] Higher Signal-to-Noise Ratio values give less grain to brighter pixels. 0 disables this feature. // -- Advanced Film Grain settings -- #define FilmGrain_mean 0.50 //[0.00 to 1.00] The average mean of the gaussian noise. Probably best kept at the middle value (0.50) //A sideeffect of the Film Grain effect is that it also dithers the screen. //You don't need both the Film Grain and the Dither effect enabled at the same time. /*-----------------------------------------------------------. / Vignette settings / '-----------------------------------------------------------*/ #define VignetteRatio 1.00 //[0.15 to 6.00] Sets a width to height ratio. 1.00 (1/1) is perfectly round, while 1.60 (16/10) is 60 % wider than it's high. #define VignetteRadius 1.00 //[-1.00 to 3.00] lower values = stronger radial effect from center #define VignetteAmount -1.00 //[-2.00 to 1.00] Strength of black. -2.00 = Max Black, 1.00 = Max White. #define VignetteSlope 8 //[1 to 16] How far away from the center the change should start to really grow strong (odd numbers cause a larger fps drop than even numbers) #define VignetteCenter float2(0.500, 0.500) //[0.000 to 1.000, 0.000 to 1.000] Center of effect. /*-----------------------------------------------------------. / Dither settings / '-----------------------------------------------------------*/ #define dither_method 1 //[1 or 2] 1 = Ordered dithering (very good and very fast), 2 = Random dithering (different but slightly slower dithering) //Note that the patterns used by Dither, makes an image harder to compress. //This can make your screenshots and video recordings take up more space. /*-----------------------------------------------------------. / Border settings / '-----------------------------------------------------------*/ #define border_width float2(0,1) //[0 to 2048, 0 to 2048] (X,Y)-width of the border. Measured in pixels. If this is set to 0,0 then the border_ratio will be used instead #define border_ratio float(2.35 / 1.0) //[0.1000 to 10.0000] Set the desired ratio for the visible area. You MUST use floating point - Integers do not work right. //Examples that work: (1680.0 / 1050.0), (16.0 / 10.0), (1.6) Examples that does NOT work right: (1680 / 1050), (16 / 10) #define border_color float3(180, 0, 0) //[0 to 255, 0 to 255, 0 to 255] What color the border should be. In integer RGB colors, meaning 0,0,0 is black and 255,255,255 is full white. /*-----------------------------------------------------------. / Splitscreen settings / '-----------------------------------------------------------*/ #define splitscreen_mode 1 //[1|2|3|4|5|6] 1 = Vertical 50/50 split, 2 = Vertical 25/50/25 split, 3 = Vertical 50/50 angled split, 4 = Horizontal 50/50 split, 5 = Horizontal 25/50/25 split, 6 = Curvy vertical 50/50 split /*-----------------------------------------------------------. / Transition / '-----------------------------------------------------------*/ #define Transition_time 5000 //[1 to 60000] Milliseconds the transition lasts (1000 milliseconds is 1 second) #define Transition_texture "Winners_Dont_Use_Drugs.png" //["filename"] Filename for the texture to use. Put your custom textures in SweetFX/Textures/ #define Transition_texture_width 720 //Image width. #define Transition_texture_height 480 //Image height. #define Transition_type ImageFadeOut //Can be "FadeIn", "FadeOut", "CurtainOpen", "CurtainClose" or "ImageFadeOut" /*-----------------------------------------------------------. / Depth / '-----------------------------------------------------------*/ #define Depth_z_near 0.01 //[0.00001 to 100000.0] Camera z near #define Depth_z_far 100.00 //[0.00001 to 100000.0] Camera z far, must be further than the near value. /*-----------------------------------------------------------. / Custom settings / '-----------------------------------------------------------*/ #define custom_strength 1.1 //[0.00 to 1.00] Adjust the strength of the effect
Good luck!

Best regards, Gerhard

Thank you for your assistance very helpful !!! I wanted to ask that those responsible for the setup screen is dark? Sorry for bad english

Uufflakke · « **Reply #38 on:** July 05, 2015, 02:44:45 AM »

Quote from: hadji4 on July 05, 2015, 12:27:46 AM

Thank you for your assistance very helpful !!! I wanted to ask that those responsible for the setup screen is dark? Sorry for bad english

The SweetFX settings not only does its job in game while flying but also influences colours,contrast etc. of the splash screen and setup screen.
If you want default setup screen as you are used to and effects only while flying then open the Global_settings file in your SweetFX folder and change the 1 into 0 in this line:

#define ReShade_Start_Enabled 0 //[0 or 1] Start with the effects enabled or disabled?

Now everything is back to normal. Effects will get activated after pressing the Scroll Lock button.

hadji4 · « **Reply #39 on:** July 05, 2015, 04:48:10 AM »

with on and off I understand. But if you insert another instance is not your SweetFX_settings settings and such other SweetFX_Settings_IL-2 Sturmovik- 1946 [CUP] _IL-2
Then when you start getting much screen is dark? Thank you very much !!!

Darkwind · « **Reply #40 on:** July 06, 2015, 07:13:39 AM »

Has anyone found any really impressive settings?? ???

bomberkiller · « **Reply #41 on:** July 06, 2015, 07:20:16 AM »

Quote

Has anyone found any really impressive settings??

...try these settings:

Code: [Select]

   /*-----------------------------------------------------------.
  /                       Description                           /
  '------------------------------------------------------------/

Game:
Preset:
SweetFX: v2.0 Preview 8 by CeeJay.dk
API hook: Reshade by Crosire

This is a preview release meant to allow users to beta test SweetFXs 2.0 new injector called ReShade.
More features, bugfixes and performance optimizations will come before release.

Hope you enjoy SweetFX and ReShade.
 - CeeJay.dk
 
   /*-----------------------------------------------------------.
  /                      Choose effects                         /
  '-----------------------------------------------------------*/
// Effects are listed in the order that they are applied.
// Set to 1 for ON or 0 for OFF
#define USE_ASCII            0 //[0 or 1] Ascii : Converts the image to Ascii-art.
#define USE_CARTOON          0 //[0 or 1] Cartoon : "Toon"s the image.
#define USE_SMAA            0 //[0 or 1] SMAA Anti-aliasing : Smoothens jagged lines using the SMAA technique.
#define USE_FXAA             1 //[0 or 1] FXAA Anti-aliasing : Smoothens jagged lines using the FXAA technique.
#define USE_EXPLOSION        0 //[0 or 1] Explosion : Scatters the pixels, making the image look fuzzy.
#define USE_CA               0 //[0 or 1] Chromatic Aberration : Mimics the look of a cheap camera lens, by distorting the colors.
#define USE_ADVANCED_CRT     0 //[0 or 1] Advanced CRT : Simulates an old CRT TV display. (has a very high performance cost)
#define USE_PIXELART_CRT     0 //[0 or 1] PixelArt CRT : Scanlines for pixel art (high performance cost)
#define USE_BLOOM            1 //[0 or 1] Bloom : Makes bright lights bleed their light into their surroundings (relatively high performance cost)
#define USE_HDR              1 //[0 or 1] HDR : Not actual HDR - It just tries to mimic an HDR look (relatively high performance cost)
#define USE_LUMASHARPEN      1 //[0 or 1] LumaSharpen : Sharpens the image.
#define USE_LENS_DISTORTION 0 //[0 or 1] Cubic Lens Distortion : Distorts the lens cubicly. (WIP)

#define USE_NOSTALGIA       0 //[0 or 1] Nostalgia : Remember when you played that game you always played on that first system of yours? You don't? Well here is a reminder.
#define USE_LEVELS           0 //[0 or 1] Levels : Sets a new black and white point. This increases contrast but causes clipping. Use Curves instead if you want to avoid that.
#define USE_TECHNICOLOR      0 //[0 or 1] TECHNICOLOR : Attempts to mimic the look of an old movie using the Technicolor three-strip color process (Techicolor Process 4)
#define USE_TECHNICOLOR2    0 //[0 or 1] TECHNICOLOR 2 : Yet another Technicolor effect - not sure if this stays or not. Let me know if you like it.
#define USE_DPX                0 //[0 or 1] Cineon DPX : Should make the image look like it's been converted to DXP Cineon - basically it's another movie-like look similar to technicolor.
#define USE_MONOCHROME       0 //[0 or 1] Monochrome : Monochrome makes the colors disappear.
#define USE_COLORMATRIX      0 //[0 or 1] Color Matrix : Allows color modification using a user-defined color matrix.
#define USE_LIFTGAMMAGAIN    0 //[0 or 1] Lift Gamma Gain : Adjust brightness and color of shadows, midtones and highlights.
#define USE_TONEMAP          0 //[0 or 1] Tonemap : Adjust gamma, exposure, saturation, bleach and defog. (may cause clipping)
#define USE_VIBRANCE         0 //[0 or 1] Vibrance : Intelligently saturates (or desaturates if you use negative values) the pixels depending on their original saturation.
#define USE_CURVES           0 //[0 or 1] Curves : Contrast adjustments using S-curves.
#define USE_SEPIA            0 //[0 or 1] Sepia : Sepia tones the image.
#define USE_VIGNETTE         0 //[0 or 1] Vignette : Darkens the edges of the image to make it look more like it was shot with a camera lens. May cause banding artifacts.
#define USE_FILMGRAIN        0 //[0 or 1] Film Grain : Adds film grain to the image.
#define USE_DITHER           0 //[0 or 1] Dither : Applies dithering to simulate more colors than your monitor can display. This lessens banding artifacts (mostly caused by Vignette)
#define USE_BORDER           0 //[0 or 1] Border : Can be used to create letterbox borders around the image.
#define USE_SPLITSCREEN      0 //[0 or 1] Splitscreen : Enables the before-and-after splitscreen comparison mode. (Only partially working right now)

#define USE_TRANSITION       0 //[0 or 1] Transition : Shows a welcome screen and then transitions to the regularly scheduled programming

#define USE_DEPTH            0 //[0 or 1] Depth : Enables the possibility to display the depth buffer - You will still need to toogle it on/off with (*) in-game

#define USE_CUSTOM           0 //[0 or 1] Custom : Write your own shader by editing custom.h, and then enable it here.

   /*-----------------------------------------------------------.
  /                         Ascii settings                      /
  '-----------------------------------------------------------*/
#define Ascii_input_image                         1   //[1 or 2] 1 = Color buffer, 2 = Depth buffer.
#define Ascii_spacing                             1   //[0 to 9] Determines the spacing between characters. I feel 1 to 3 looks best.

#define Ascii_font                                2   //[1 or 2] 1 = 5x5 font, 2 = 3x5 font
#define Ascii_font_color       float3(255, 255, 255)  //[0 to 255, 0 to 255, 0 to 255] What color the font should be. In integer RGB colors.
#define Ascii_background_color float3(0, 0, 0)        //[0 to 255, 0 to 255, 0 to 255] What color the background should be. In integer RGB colors.
#define Ascii_swap_colors                         0   //Swaps the font and background color when you are too lazy to edit the settings above (I know I am)

#define Ascii_invert_brightness                   0   //[0 or 1]
#define Ascii_font_color_mode                     1   //[0 to 2] 0 = font_color, 1 = image color, 2 = colorized grayscale
 

   /*-----------------------------------------------------------.
  /                  SMAA Anti-aliasing settings                /
  '-----------------------------------------------------------*/
#define SMAA_THRESHOLD              0.20  //[0.05 to 0.20] Edge detection threshold. If SMAA misses some edges try lowering this slightly. I prefer between 0.08 and 0.12.
#define SMAA_DEPTH_THRESHOLD        0.100 //[0.001 to 0.100] Depth edge detection threshold. Same as above but for the depth edge detection. This can go insanely low and still look good.
#define SMAA_MAX_SEARCH_STEPS         32  //[0 to 98] Determines the radius SMAA will search for aliased edges
#define SMAA_MAX_SEARCH_STEPS_DIAG     6  //[0 to 16] Determines the radius SMAA will search for diagonal aliased edges
#define SMAA_CORNER_ROUNDING           0  //[0 to 100] Determines the percent of antialiasing to apply to corners. 0 seems to affect fine text the least so it's the default.

// -- Advanced SMAA settings --
#define SMAA_EDGE_DETECTION            2  //[1|2|3] 1 = Luma edge detection, 2 = Color edge detection, 3 = Depth edge detection
#define SMAA_DIRECTX9_LINEAR_BLEND     0  //[0 or 1] Using DX9 HARDWARE? (software version doesn't matter) if so this needs to be 1 - If not, leave it at 0.
                                          //Enable this only if you use a Geforce 7xxx series or older card, or a Radeon X1xxx series or older card.

// -- SMAA Predication settings --
#define SMAA_PREDICATION               0  //[0 or 1] Enables predication which uses BOTH the color and the depth texture for edge detection to more accurately detect edges.
#define SMAA_PREDICATION_THRESHOLD 0.001  // Threshold to be used in the depth buffer.                                     
#define SMAA_PREDICATION_SCALE       2.0  // How much to scale the global threshold used for luma or color edge detection when using predication
#define SMAA_PREDICATION_STRENGTH    0.4  // How much to locally decrease the threshold.

// -- Debug SMAA settings --
#define SMAA_DEBUG_OUTPUT             0  //[0 to 4] 0 = Normal, 1 = edgesTex, 2 = blendTex, 3 = areaTex, 4 = searchTex - Only for troubleshooting. Users don't need to mess with this.


   /*-----------------------------------------------------------.
  /                  FXAA Anti-aliasing settings                /
  '-----------------------------------------------------------*/
#define FXAA_QUALITY__PRESET          9  //[1 to 9] Choose the quality preset. 9 is the highest quality.
#define fxaa_Subpix               0.000  //[0.000 to 1.000] Choose the amount of sub-pixel aliasing removal. Higher values makes the image softer/blurrier.
#define fxaa_EdgeThreshold        0.166  //[0.000 to 1.000] Edge detection threshold. The minimum amount of local contrast required to apply algorithm. Similar to SMAA_THRESHOLD
#define fxaa_EdgeThresholdMin     0.000  //[0.000 to 1.000] Darkness threshold. Pixels darker than this are not processed in order to increase performance.


   /*-----------------------------------------------------------.
  /                     Explosion settings                      /
  '-----------------------------------------------------------*/
#define Explosion_Radius     2.0         //[0.2 to 100.0] Amount of effect you want.


   /*-----------------------------------------------------------.
  /                 Chromatic Aberration settings               /
  '-----------------------------------------------------------*/
#define Chromatic_shift float2(2.5,-0.5) //[-100.0 to 100.0, -100.00 to 100.0] Distance (X,Y) in pixels to shift the color components.
                                         //For a slightly blurred look try fractional values (.5) between two pixels.
#define Chromatic_strength   1.0         //Adjust the strength of the effect.



   /*-----------------------------------------------------------.
  /                      Cartoon settings                       /
  '-----------------------------------------------------------*/
#define CartoonPower         1.5     //[0.1 to 10.0] Amount of effect you want.
#define CartoonEdgeSlope     1.5     //[0.1 to 8.0] Raise this to filter out fainter edges. You might need to increase the power to compensate. Whole numbers are faster.


   /*----------------------------------------------------------.
  /                    Advanced CRT settings                   /
  '----------------------------------------------------------*/
#define CRTAmount            1.00    //[0.00 to 1.00]  Amount of CRT effect you want

#define CRTResolution        2.0     //[1.0 to 8.0]    Input size coefficent (low values gives the "low-res retro look"). Default is 1.2
#define CRTgamma             2.2     //[0.0 to 4.0]    Gamma of simulated CRT (default 2.2)
#define CRTmonitorgamma      2.4     //[0.0 to 4.0]    Gamma of display monitor (typically 2.2 is correct)
#define CRTBrightness        1.2     //[1.0 to 3.0]    Used to boost brightness a little. Default is 1.0
#define CRTScanlineIntensity 2.0     //[2.0 to 4.0]    Scanlines intensity (use integer values preferably). Default is 2.0
#define CRTScanlineGaussian  1       //[0 or 1]        Use the "new nongaussian scanlines bloom effect". Default is on

#define CRTCurvature         1       //[[0 or 1]          "Barrel effect" enabled (1) or off (0)
#define CRTCurvatureRadius   2.0     //[0.0 to 2.0]       Curvature Radius (only effective when Curvature is enabled). Default is 1.5
#define CRTCornerSize        0.0100  //[0.0000 to 0.0020] Higher values, more rounded corner. Default is 0.001
#define CRTDistance          2.00    //[0.00 to 4.00]     Simulated distance from viewer to monitor. Default is 2.00
#define CRTAngleX            0.00    //[-0.20 to 0.20]    Tilt angle in radians (X coordinates)
#define CRTAngleY           -0.15    //[-0.20 to 0.20]    Tilt angle in radians (Y coordinates). (Value of -0.15 gives the 'arcade tilt' look)
#define CRTOverScan          1.00    //[1.00 to 1.10]     Overscan (e.g. 1.02 for 2% overscan). Default is 1.01
#define CRTOversample        0       //[0 or 1]           Enable 3x oversampling of the beam profile (warning : performance hit)

   /*-----------------------------------------------------------.
  /                         Pixel Art CRT                       /
  '-----------------------------------------------------------*/

// -- Emulated input resolution --
#define PixelArtCRT_resolution_mode 1 //[1 or 2] 1 = Ratio, 2 = Fixed resolution
#define PixelArtCRT_resolution_ratio (1.0/4.0)   //
#define PixelArtCRT_fixed_resolution float2(320.0,160.0)  //

// -- Hardness --
#define PixelArtCRT_hardScan -24.0  // Hardness of scanline : -8.0 = soft, -16.0 = medium
#define PixelArtCRT_hardPix  -24.0  // Hardness of pixels in scanline : -2.0 = soft, -4.0 = hard

// -- Display warp --
#define PixelArtCRT_warp float2(1.0/64.0,1.0/24.0) // Display warp : 0.0 = none , 1.0/8.0 = extreme

// -- Type of shadow mask --
#define PixelArtCRT_ShadowMask 3 // Type of shadow mask : 1 = Very compressed TV style shadow mask, 2 = Aperture-grille, 3 = Stretched VGA style shadow mask, 4 = VGA style shadow mask

// -- Amount of shadow mask --
#define PixelArtCRT_maskDark  0.5 //
#define PixelArtCRT_maskLight 1.5 //

// -- Falloff shape --
#define PixelArtCRT_shape 3.0 // Falloff shape : 1.0 = exp(x), 1.25 = in between, 2.0  = gaussian, 3.0  = more square

// -- Amp signal --
#define PixelArtCRT_overdrive 1.25 //

   /*-----------------------------------------------------------.
  /                       Bloom settings                        /
  '-----------------------------------------------------------*/
#define BloomThreshold      22.25    //[0.00 to 50.00] Threshold for what is a bright light (that causes bloom) and what isn't.
#define BloomPower           1.446   //[0.000 to 8.000] Strength of the bloom
#define BloomWidth           0.0142  //[0.0000 to 1.0000] Width of the bloom


   /*-----------------------------------------------------------.
  /                        HDR settings                         /
  '-----------------------------------------------------------*/
#define HDRPower           1.2  //1.33    //[0.00 to 8.00] Strangely lowering this makes the image brighter
#define radius2              0.87    //[0.00 to 8.00] Raising this seems to make the effect stronger and also brighter


   /*-----------------------------------------------------------.
  /                     LumaSharpen settings                    /
  '-----------------------------------------------------------*/
// -- Sharpening --
#define sharp_strength 0.95   //[0.10 to 3.00] Strength of the sharpening
#define sharp_clamp    0.035  //[0.000 to 1.000] Limits maximum amount of sharpening a pixel recieves - Default is 0.035

// -- Advanced sharpening settings --
#define pattern 2        //[1|2|3|4] Choose a sample pattern. 1 = Fast, 2 = Normal, 3 = Wider, 4 = Pyramid shaped.
#define offset_bias 1.0  //[0.0 to 6.0] Offset bias adjusts the radius of the sampling pattern.
                         //I designed the pattern for offset_bias 1.0, but feel free to experiment.

// -- Debug sharpening settings --
#define show_sharpen 0   //[0 or 1] Visualize the strength of the sharpen (multiplied by 4 to see it better)

   /*----------------------------------------------------------.
  /                      Notalgia settings                     /
  '----------------------------------------------------------*/
//Nothing here yet, but you will get to set the palette to use and toggle dithering, and maybe pixelate the image .. once the effect is done.
//For now it just displays the image with a C64 palette

   /*----------------------------------------------------------.
  /                       Levels settings                      /
  '----------------------------------------------------------*/
#define Levels_black_point 16     //[0 to 255] The black point is the new black - literally. Everything darker than this will become completely black. Default is 16.0
#define Levels_white_point 235    //[0 to 255] The new white point. Everything brighter than this becomes completely white. Default is 235.0

//Colors between the two points will stretched, which increases contrast, but details above and below the points are lost (this is called clipping).

// -- Debug settings --
#define Levels_highlight_clipping 0 //[0 or 1] Highlight the pixels that clip. Red = Some detail is lost in the highlights, Yellow = All detail is lost in the highlights,
                                    //         Blue = Some detail is lost in the shadows, Cyan = All detail is lost in the shadows.


   /*-----------------------------------------------------------.
  /                      TECHNICOLOR settings                   /
  '-----------------------------------------------------------*/
#define TechniAmount        0.40 //[0.00 to 1.00]
#define TechniPower         4.00 //[0.00 to 8.00]
#define redNegativeAmount   0.88 //[0.00 to 1.00]
#define greenNegativeAmount 0.88 //[0.00 to 1.00]
#define blueNegativeAmount  0.88 //[0.00 to 1.00]

   /*-----------------------------------------------------------.
  /                     TECHNICOLOR 2 settings                  /
  '-----------------------------------------------------------*/
#define Technicolor2_Red_Strength    0.2      //[0.05 to 1.0] Color Strength of Red channel. Higher means darker and more intense colors.   
#define Technicolor2_Green_Strength 0.2      //[0.05 to 1.0] Color Strength of Green channel. Higher means darker and more intense colors.
#define Technicolor2_Blue_Strength    0.2      //[0.05 to 1.0] Color Strength of Blue channel. Higher means darker and more intense colors.
#define Technicolor2_Brightness      1.0      //[0.5 to 1.5] Brightness Adjustment, higher means brighter image.
#define Technicolor2_Strength         1.0      //[0.0 to 1.0] Strength of Technicolor effect. 0.0 means original image.
#define Technicolor2_Saturation       0.7      //[0.0 to 1.5] Additional saturation control since technicolor tends to oversaturate the image.

   /*-----------------------------------------------------------.
  /                       Cineon DPX settings                   /
  '-----------------------------------------------------------*/
#define Red   8.0  //[1.0 to 15.0]
#define Green 8.0  //[1.0 to 15.0]
#define Blue  8.0  //[1.0 to 15.0]

#define ColorGamma    2.5  //[0.1 to 2.5] Adjusts the colorfulness of the effect in a manner similar to Vibrance. 1.0 is neutral.
#define DPXSaturation 3.0  //[0.0 to 8.0] Adjust saturation of the effect. 1.0 is neutral.

#define RedC   0.36  //[0.60 to 0.20]
#define GreenC 0.36  //[0.60 to 0.20]
#define BlueC  0.34  //[0.60 to 0.20]

#define Blend 0.2    //[0.00 to 1.00] How strong the effect should be.


   /*------------------------------------------------------------.
  /                       Monochrome settings                    /
  '------------------------------------------------------------*/
#define Monochrome_conversion_values float3(0.21, 0.72, 0.07) //[0.00 to 1.00] Percentage of RGB to include (should sum up to 1.00)
#define Monochrome_color_saturation         0.00            //[0.00 to 2.00] Percentage of saturation to keep. Default is 0.00 , values above 1.00 boost saturation above normal.


   /*-----------------------------------------------------------.
  /                      Color Matrix settings                  /
  '-----------------------------------------------------------*/
                              //  Red   Green   Blue
#define ColorMatrix_Red   float3(0.817, 0.183, 0.000) //[0.00 to 1.00] How much of Red, Green and Blue the new red value should contain   - Should sum to 1.000 if you don't wish to change the brightness
#define ColorMatrix_Green float3(0.333, 0.667, 0.000) //[0.00 to 1.00] How much of Red, Green and Blue the new green value should contain - Should sum to 1.000 if you don't wish to change the brightness
#define ColorMatrix_Blue  float3(0.000, 0.125, 0.875) //[0.00 to 1.00] How much of Red, Green and Blue the new blue value should contain  - Should sum to 1.000 if you don't wish to change the brightness

#define ColorMatrix_strength 1.0                      //Adjust the strength


   /*-----------------------------------------------------------.
  /                      Lift Gamma Gain settings               /
  '-----------------------------------------------------------*/
#define RGB_Lift  float3(1.000, 1.000, 1.000)  //[0.000 to 2.000] Adjust shadows for Red, Green and Blue.
#define RGB_Gamma float3(1.000, 1.000, 1.000)  //[0.000 to 2.000] Adjust midtones for Red, Green and Blue
#define RGB_Gain  float3(1.000, 1.000, 1.000)  //[0.000 to 2.000] Adjust highlights for Red, Green and Blue

//Note that a value of 1.000 is a neutral setting that leave the color unchanged.

   /*-----------------------------------------------------------.
  /                        Tonemap settings                     /
  '-----------------------------------------------------------*/
#define Gamma       1.000  //[0.000 to 2.000] Adjust midtones. 1.000 is neutral. This setting does exactly the same as the one in Lift Gamma Gain, only with less control.

#define Exposure    0.000  //[-1.000 to 1.000] Adjust exposure

#define Saturation  0.000  //[-1.000 to 1.000] Adjust saturation

#define Bleach      0.000  //[0.000 to 1.000] Brightens the shadows and fades the colors

#define Defog       0.000  //[0.000 to 1.000] How much of the color tint to remove
#define FogColor float3(0.00, 0.00, 2.55) //[0.00 to 2.55, 0.00 to 2.55, 0.00 to 2.55] What color to remove - default is blue


   /*-----------------------------------------------------------.
  /                       Vibrance settings                     /
  '-----------------------------------------------------------*/
#define Vibrance     0.15  //[-1.00 to 1.00] Intelligently saturates (or desaturates if you use negative values) the pixels depending on their original saturation.
#define Vibrance_RGB_balance float3(1.00, 1.00, 1.00) //[-10.00 to 10.00,-10.00 to 10.00,-10.00 to 10.00] A per channel multiplier to the Vibrance strength so you can give more boost to certain colors over others


   /*-----------------------------------------------------------.
  /                        Curves settings                      /
  '-----------------------------------------------------------*/
#define Curves_mode        2 //[0|1|2] Choose what to apply contrast to. 0 = Luma, 1 = Chroma, 2 = both Luma and Chroma. Default is 0 (Luma)
#define Curves_contrast 0.15 //[-1.00 to 1.00] The amount of contrast you want

// -- Advanced curve settings --
#define Curves_formula     2 //[1|2|3|4|5|6|7|8|9|10|11] The contrast s-curve you want to use.
                             //1 = Sine, 2 = Abs split, 3 = Smoothstep, 4 = Exp formula, 5 = Simplified Catmull-Rom (0,0,1,1), 6 = Perlins Smootherstep
                             //7 = Abs add, 8 = Techicolor Cinestyle, 9 = Parabola, 10 = Half-circles. 11 = Polynomial split.
                             //Note that Technicolor Cinestyle is practically identical to Sine, but runs slower. In fact I think the difference might only be due to rounding errors.
                             //I prefer 2 myself, but 3 is a nice alternative with a little more effect (but harsher on the highlight and shadows) and it's the fastest formula.


   /*-----------------------------------------------------------.
  /                        Sepia settings                       /
  '-----------------------------------------------------------*/
#define ColorTone float3(1.40, 1.10, 0.90) //[0.00 to 2.55, 0.00 to 2.55, 0.00 to 2.55] What color to tint the image
#define GreyPower  0.11                    //[0.00 to 1.00] How much desaturate the image before tinting it
#define SepiaPower 0.58                    //[0.00 to 1.00] How much to tint the image


   /*-----------------------------------------------------------.
  /                      Daltonize settings                     /
  '-----------------------------------------------------------*/
#define Daltonize_type 1    //[1|2|3] Type of colorblindness. 1 = Protanopia (missing red spectrum), 2 = Deuteranopia (missing green spectrum), 3 = Tritanopia (missing blue spectrum)

   /*-----------------------------------------------------------.
  /                      Film Grain settings                    /
  '-----------------------------------------------------------*/
#define FilmGrain_intensity 0.50 //[0.00 to 1.00] How visible the grain is. Higher is more visible.
#define FilmGrain_variance  0.40 //[0.00 to 1.00] Controls the variance of the gaussian noise. Lower values look smoother.
#define FilmGrain_SNR          6 //[0 to 16] Higher Signal-to-Noise Ratio values give less grain to brighter pixels. 0 disables this feature.

// -- Advanced Film Grain settings --
#define FilmGrain_mean     0.50 //[0.00 to 1.00] The average mean of the gaussian noise. Probably best kept at the middle value (0.50)

//A sideeffect of the Film Grain effect is that it also dithers the screen.
//You don't need both the Film Grain and the Dither effect enabled at the same time.

   /*-----------------------------------------------------------.
  /                       Vignette settings                     /
  '-----------------------------------------------------------*/
#define VignetteRatio 1.00    //[0.15 to 6.00]  Sets a width to height ratio. 1.00 (1/1) is perfectly round, while 1.60 (16/10) is 60 % wider than it's high.
#define VignetteRadius 1.00   //[-1.00 to 3.00] lower values = stronger radial effect from center
#define VignetteAmount -1.00  //[-2.00 to 1.00] Strength of black. -2.00 = Max Black, 1.00 = Max White.
#define VignetteSlope 8       //[1 to 16] How far away from the center the change should start to really grow strong (odd numbers cause a larger fps drop than even numbers)
#define VignetteCenter float2(0.500, 0.500)  //[0.000 to 1.000, 0.000 to 1.000] Center of effect.

   /*-----------------------------------------------------------.
  /                        Dither settings                      /
  '-----------------------------------------------------------*/
#define dither_method      1  //[1 or 2] 1 = Ordered dithering (very good and very fast), 2 = Random dithering (different but slightly slower dithering)

//Note that the patterns used by Dither, makes an image harder to compress.
//This can make your screenshots and video recordings take up more space.


   /*-----------------------------------------------------------.
  /                        Border settings                      /
  '-----------------------------------------------------------*/
#define border_width float2(0,1)        //[0 to 2048, 0 to 2048] (X,Y)-width of the border. Measured in pixels. If this is set to 0,0 then the border_ratio will be used instead
#define border_ratio float(2.35 / 1.0)  //[0.1000 to 10.0000] Set the desired ratio for the visible area. You MUST use floating point - Integers do not work right.
                                        //Examples that work: (1680.0 / 1050.0), (16.0 / 10.0), (1.6) Examples that does NOT work right: (1680 / 1050), (16 / 10)
#define border_color float3(180, 0, 0)  //[0 to 255, 0 to 255, 0 to 255] What color the border should be. In integer RGB colors, meaning 0,0,0 is black and 255,255,255 is full white.


   /*-----------------------------------------------------------.
  /                     Splitscreen settings                    /
  '-----------------------------------------------------------*/
#define splitscreen_mode   1  //[1|2|3|4|5|6]  1 = Vertical 50/50 split, 2 = Vertical 25/50/25 split, 3 = Vertical 50/50 angled split, 4 = Horizontal 50/50 split, 5 = Horizontal 25/50/25 split, 6 = Curvy vertical 50/50 split

   /*-----------------------------------------------------------.
  /                          Transition                         /
  '-----------------------------------------------------------*/
 
#define Transition_time            5000  //[1 to 60000] Milliseconds the transition lasts (1000 milliseconds is 1 second)
#define Transition_texture "Winners_Dont_Use_Drugs.png" //["filename"] Filename for the texture to use. Put your custom textures in SweetFX/Textures/
#define Transition_texture_width    720  //Image width.
#define Transition_texture_height   480  //Image height.
#define Transition_type     ImageFadeOut //Can be "FadeIn", "FadeOut", "CurtainOpen", "CurtainClose" or "ImageFadeOut"

   /*-----------------------------------------------------------.
  /                            Depth                            /
  '-----------------------------------------------------------*/
#define Depth_z_near               0.01   //[0.00001 to 100000.0] Camera z near
#define Depth_z_far              100.00   //[0.00001 to 100000.0] Camera z far, must be further than the near value.

   /*-----------------------------------------------------------.
  /                       Custom settings                       /
  '-----------------------------------------------------------*/
#define custom_strength  1.1 //[0.00 to 1.00] Adjust the strength of the effect

SAS~Storebror · « **Reply #42 on:** July 06, 2015, 07:20:50 AM »

Quote from: Darkwind on July 06, 2015, 07:13:39 AM

Has anyone found any really impressive settings?? ???

Do bears actually shit in the woods?
Please specify "really impressive", we seem to have different perceptions.

Best regards - Mike

Griffon_301 · « **Reply #43 on:** July 06, 2015, 10:44:29 AM »

using the settings posted by BK all I can say is WOW - a whole new game now! works great in CUP btw and with the right settings for missions (time, overcast etc) great for taking impressive screenies;

Jgunner · « **Reply #44 on:** August 06, 2015, 05:36:49 PM »

I've followed the directions, I've tried everything. Once Reshade whatever 32.dll is renamed to opengl32.dll it crashes. My il-2 doesn't even get into the splash, it crashes before the game launches. Please help.

bomberkiller · « **Reply #45 on:** August 06, 2015, 07:32:51 PM »

Hello Jgunner,

at first: I fly 4.10 & DBW with a Nvidia videocard.

If it is the same for you try what follows please:

1.) Dezip this folder on your desktop, copy the deziped folder and put it in your maingamefolder (overwrite your old folder if you're ask!):

https://www.mediafire.com/download/cyxccwv41vb40zy/SweetFX.7z

(My settings are integrated in this folder - at first please don't change nothing in it.)

2.) Dezip this folder on your desktop and put this deziped folder in your maingamefolder too (if you're ask overwrite your old OpenGL32.dll):

https://www.mediafire.com/download/fdmulqa36tbu4w3/OpenGL32+dll.7z

Now it will run. Good luck!

Wbr, Gerhard

SAS~Storebror · « **Reply #46 on:** August 07, 2015, 04:42:15 AM »

I would like to add that in order to get reshade to work, you need to match the hardware requirements.
For OpenGL your graphics card needs to provide support for OpenGL 4.3 at least.
For Nvidia cards, this usually applies to the GT(X)400 series cards and later.

You can see at a glance whether this is an issue by looking at the file "opengl32.log" which will be created in your IL-2 game folder by Reshade.
When you read something like this

Code: [Select]

ERROR | Your graphics card does not seem to support OpenGL 4.3. Initialization failed.then Reshade just cannot work for you.

Best regards - Mike

SAS~Tom2 · « **Reply #47 on:** August 07, 2015, 05:30:40 AM »

For people having issues with it, gapa gamma is a real neat alternative IMHO, I use it with all my IL-2 installs.
https://www.sas1946.com/main/index.php?topic=3324.0

https://www.sas1946.com/main/index.php?topic=21096.0

Sweet FX has more features but also more power to pprevent proper game loading if it does not work. I don't like it.

Well,that is just me, maybe connected to the fact I also totally do not like NVidia.

Author Topic: I just got Reshade/SweetFX working in OpenGL... (Read 145195 times)

Darkwind

Re: I just got Reshade/SweetFX working in OpenGL...

hadji4

Re: I just got Reshade/SweetFX working in OpenGL...

Uufflakke

Re: I just got Reshade/SweetFX working in OpenGL...

hadji4

Re: I just got Reshade/SweetFX working in OpenGL...

Darkwind

Re: I just got Reshade/SweetFX working in OpenGL...

bomberkiller

Re: I just got Reshade/SweetFX working in OpenGL...

SAS~Storebror

Re: I just got Reshade/SweetFX working in OpenGL...

Griffon_301

Re: I just got Reshade/SweetFX working in OpenGL...

Jgunner

Re: I just got Reshade/SweetFX working in OpenGL...

bomberkiller

Re: I just got Reshade/SweetFX working in OpenGL...

SAS~Storebror

Re: I just got Reshade/SweetFX working in OpenGL...

SAS~Tom2

Re: I just got Reshade/SweetFX working in OpenGL...