Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Sir_Arlequin]

First of all I greet you from Argentina, Buenos Aires and I thank you for this beautiful work, and that truth is exelent, the balance found between the graphics and speed of Sim's work, without being too heavy to pc.

I have a problem in the controls.
controls not work: next and prew eacon, compass heading plus and minus, and jettions stores.


si entienden español ( mejor    )

no me funcionan los controles de next and prew eacon, como tambien los de heading head, plus and minus, como tampoco, el de jettions stores.


Muchas Gracias!

[razor1uk]

Hola Arlequin! Sorry to take some time, welcome to SAS46', I hope you enjoy it here, we are normally quite helpful and quick to aid....
You might want to check that you have assigned to those controls a key or button in the controls menu for each of your different named pilot profiles.

[Sir_Arlequin]

 No problem my friend...  tomato the time is necesary, ok ?  ... don´t worry... and thank for help me. i ám sorry for my bad inglish.

yes, check the controls assigned ,and name of pilot too, and is all ok...  is more, i have only one porfile in the sim.
no idea what be can hapen.

i´m using, traductor inglish of google.

thank for you welcome.


------

in SAS, yes ,work well, but when i listen the radio for example and i open the flight control , your color is not red, is grey , and when used this,  the beacon, alone and automatically,  put on in  "beacon none".     is this normality ?

it´s a shame, that´s can´t the R/R/R ...

[Sir_Arlequin]

as it is/ as seen, the flight control in DBW and SAS Modac 3: ((Alt + number , etc....)) ?

Photo or video ... look on youtube. but found none ( reference)

 even I can not find these problems, and I really just can not make maximum use of these packages.

 Because I get this flight control 4.10.1
 without R / R / R does not see the R / R / R in the FMB

 for me, the controls were not installed well,
in the DBW, jettions store works, and the degrees of the compass too (but, no sign on the right on color)
 but the beacon does nothing directly.
and do not appear either information from radio beacons.



 I find these files and how I could pass the flight control of the UP 3.0 RC2 ... if you can.

[mac1]

Yeah I've the same problems with up and dbw. in up3 ive no options to assign beacons in realistic nav mode and in dbw i can change mag compass headings but not change beacons or even see them on map even though i can assign buttons to change beacons... oh dear. gonna reinstall now....

[Sir_Arlequin]

I wish I could have the flight controls of UP3.0 in SAS and DBW ... can do this?? with R / R / R and others. and add (but it's a dream) asking the runway lights.

 I reinstalled twice, in multiple copies, including one in 4.10.1 only ( clean )+(SAS) ... and the zero. but no case. the problem persists.

for me, the problem is the files that control flight, but which are not or where they are. or how to change by the UP 3.0 for example.
 although
 not really, or I'm not sure what it is, flight control ...

[razor1uk]

  I hope you can solve this, possibly have you tried searching through your pilot(s) or conf ini's to find the controls, this can cause confussion since some controls have stranger names than you'd think they should.
 It could be possible for some reasons a control assignment name/binding-name has a typo/download-corruption or is missing...

[Sir_Arlequin]

thanks my friend, I see and review my conf (inside the root), looks at it, But now, thinking about what you said.
 I will try to replace it, and see what happens.
 
muchas gracias por tu ayuda

[Sir_Arlequin]

U=toggleLandingLight
Shift Z=BEACON_PLUS      (*)
Shift X=AUX1_PLUS          (*)
Shift V=BEACON_MINUS    (*)
M=pad
L=cockpitLight
K=toggleNavLights
H=autopilot
Shift N=AUX1_MINUS        (*)
Ctrl Z=showMirror
Ctrl V=cockpitDim
Tab Q=ejectPilot
Shift C=Aux_A                 (*)
Ctrl M=toggleSmokes



in the my user conf



is ok ( apparent) .... and this working well, with UP 3.0  and i don´t understand, because not work with DBW and SAS....