Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Der Wüstenfuchs]

Currently I don't have IL-2 on my computer, but I will check it as soon as I put IL-2 with 4.10 update.

[brouculy]

Thank you for the reply!    I will wait for that.
I love so much the great cockpit!

[Miglanz]

Hi,

first of all I must say that those cockpits really look wonderful, way better than before!

But I have one question and maybe someone can help me.
In my plane-list (e.g. in the QMB) I have two E-4's. The first one has the nice new mirror (from external point of view and from the inside visible), BUT opening the canopy has no visible effect, so the canopy stays closed.
With the second plane it's different: looking at it from the outside shows the mirror on top of the canopy, but the mirror is NOT visible in cockpit-view! In exchange opening the canopy is nicely animated.

What I would like might be obvious: having the mirror in external AND cockpit-view (so seeing it on top of the canopy and being able to look in the mirror from the cockpit) and on the same time seeing the canopy unclosing when I press "Open canopy".

I hope my english is good enough to submit this question properly.

Read you again,
Miglanz

[Miglanz]

Hello there,

moreover the changing of the seat position does only work with that E-4 which has NO visible opening canopy. The one where you can see the canopy opening does not have a working change of the seat position

And using the 6dof with headshake (but also with the old version where headshaking was disabled) on the E-4 with visible mirror and not opening canopy results in the fact that you can see through the motor! The 6dof view works great with all the other Bf-109's that I tried; only the certain E-4 has problems

Someone knows a solution?

[Borsch]

Hello,

I am using the über low rez 109 cockpits by Der Wüstenfuchs and 6dof trackir. The problem is that targeting reticle is cut off waaay before the horizontal edges of the reflector glass:
http://i905.photobucket.com/albums/ac259/borsch1/grab0000-1.jpg

http://i905.photobucket.com/albums/ac259/borsch1/grab0001-2.jpg

I would like it to be displayed like so:

http://i905.photobucket.com/albums/ac259/borsch1/grab0002-2.jpg

Could someone kindly suggest which values and in which files (I guess its Z_Z_mask.msh?) I should tweak to remedy the problem?

Saw this picture and thought that it was exactly relevant to my question haha
http://i905.photobucket.com/albums/ac259/borsch1/jcat%20109/13gp5.jpg

AAAND this vid as well - the working Revi: http://forum.1cpublishing.eu/showpost.php?p=180262&postcount=74

What a shame that this still has not been corrected:( I saw several posts on SimHQ asking the same question as well...

[Mick]

... although it is for the FW190, take a look here, I had the very same prob and could solve it thanks to Sani ... 

https://www.sas1946.com/main/index.php/topic,1444.0.html

[Borsch]

Thanks for that, but is it the right thing? My problem is not centering the reticle, but widening the usable reflector area where reticle is displayed when one uses 6DOF TrackIR...

[Mick]

... sorry, I thought your prob was lowering the reticle that is obviuosly too high in your screen ...

[Der Wüstenfuchs]

Alright I will try to solve this problem, and if I fail I will ask some other gurus for help

[Borsch]

That would be awesome!
And thank you for what you have already created- unbelievable achievement these 109 pits are!

[Der Wüstenfuchs]

I'm still working on it, but I think this should be fine:

[Borsch]

It is P-E-R-F-E-C-T! Yaaay!:)

Perfect look and perfect for actually aiming! Really appreciate your work Der Wustenfuchs!