Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Flying H]

After setting up a new screen 28" resolution 3840 x 2160 game loads fine, I can see the mouse pointer in yellow as it should but when I try to move the pointer it disappears! It´s not the old alt+tab in/out/in problem it´s not there any more! I´ve tried changing the setting in the[rts] section from 2, as it was to 1, 0 and 3 to no avail! What more can I do?
End of log.lst looks like this:

Code: [Select]

FM called 'FlightModels/Jeep50.fmd:WAGEN' is being loaded from Alternative File: 'wagen'
Initializing DirectSound playback device...
Primary buffer created.
Playback format is set : sampling rate = 44100, num channels = 2.
Not enought hardware buffers (0), hardware disabled
Buffer caps : Transfer rate = 0, CPU overhead = 0.
Default speaker config is : 1310724.
Direct sound audio device initialized successfully :
DX Version : 7
Hardware    - disabled [buffers : 0]
Extensions  - enabled :
  EAX ver. 1 [ ]  - disabled
  EAX ver. 2 [ ]  - disabled
  EAX ver. 3 [ ]  - disabled
  I3D ver. 2 [ ]  - disabled
  ZoomFX     [ ]  - disabled
  MacroFX    [ ]  - disabled
SIMD render [X]
num channels 32

[Feb 2, 2017 9:56:01 AM] -------------- END log session -------------
can´t see anything there connected to cursor problems!
Please help!

[Cloyd]

Are you using Win10? If so, have you tried this?:

-Right-click on the shortcut that you use to start IL2
-Go to Properties
-Go to the Compatibility tab
-Check the box that says "Disable display scaling on high DPI settings"

Also, check that the resolution in your conf.ini matches your monitor display. Win10 does some screwy things with resolutions.

[Flying H]

A big THX Cloyd! That did the trick!

[Danziger]

Are you using Win10? If so, have you tried this?:

-Right-click on the shortcut that you use to start IL2
-Go to Properties
-Go to the Compatibility tab
-Check the box that says "Disable display scaling on high DPI settings"

Also, check that the resolution in your conf.ini matches your monitor display. Win10 does some screwy things with resolutions.

Same problem here although this solution did not do the trick for me. I set resolution in config ini to native screen resolution checked the box in properties. It still opens in a non-fitting window and the mouse is not useable.

[Flying H]

Where is your game located? If in C\\Program files, move it out of there to any other location! Is your conf.ini set to read only? Right click on it , go to properties and remove the check.