Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Mick]

... the funny thing that my friend Epervier just told me, is that in some cases, for ex the dorsal gunner named Pilot3 will be hit to death, but in fact it is Pilot1 who will die, simply because the gunner has xpilot1a, xpilot1b and xhead1, instead of xpilot3a, xpilot3b and xhead3 ...! 

... this means that I should now check each and every pilot that I used ... blimey ...!

[Epervier]

Either that, or nothing will happen and the pilot concerned becomes immortal... 

[gunny0134]

ki-67-I Hiryu.

I have completed the boarding of Ranwers' pilots and interior addition to this bomber, but I have found one serious problem...!

The no.4~7 pilots of the stock version does not take off their mask 3,000 meters below (no.1~3 pilots ok).

    - 4.12.2m, BAT 4.0

That is why I am reluctant to share this.

I need someone's help....

Thank you...!!

[Mick]

ki-67-I Hiryu.

I have completed the boarding of Ranwers' pilots and interior addition to this bomber, but I have found one serious problem...!

The no.4~7 pilots of the stock version does not take off their mask 3,000 meters below (no.1~3 pilots ok).

    - 4.12.2m, BAT 4.0

That is why I am reluctant to share this.

I need someone's help....

Thank you...!!

... try adding "Hidden" like this :

[Hmask4_d0]
Mesh hmask4_d0
Parent head4_d0
Hidden

[gunny0134]

... try adding "Hidden" like this :

Yep, it's been FIXED...

Thanks to Mick, I had a good experience...!!

I knew there was such a small mistake in the stock version.

Thank you.

[gunny0134]

Ok, now I'm ready to upload the files (tested only 4.12.2m, BAT 4.0).
 
  - A6M5 : Stock ver. upgrade. Replace the existing file with this file.
  - A6M5a : Stock ver. upgrade. Replace the existing file with this file.
  - Ki-21-II Sally
  - Ki-45-Kai ko (include otsu, hei, tei) Toryu
  - Ki-49-II Donryu
  - Ki-67-I Hiryu
  - J1N1, JIN1Sa Gekko : upgrade. Replace the existing file with this file.
  - G4M1-11 : upgrade. Replace the existing file with this file.

* Mitsubishi_G3M2-11 is not a stock version, so to upload is on hold.

Just put all files into Ranwers' Japan pilots folder. And compare them to the stock versions....

내려받기 = download
http://naver.me/GKvtCxq0

Thank you.

PS : I'd love someone who's good at graphics to remove that ugly stick of stock version from the cockpit...

[bomberkiller]

Hello gunny,

thank you very much.

Best regards

 

Gerhard

[gunny0134]

Thank you...!!

The important point to my work is this (...in addition to boarding Ranwers' pilots) :

1. Removed the pilots in the air. So most of them had chairs.

2. The bottomless plane laid the floor. Then, in the case of Donryu, the height between floors was too high. So I put a ladder that pilots could go up and down between floors.

      * I will buy him a cup of coffee if anyone knows where(which plane) I got that ladder from...

3. Pilots had a Throttle and stick as possible.

4. Add cockpit dash and map on Nav's hand.

5. And etc...I hope your gentlemen enjoy my flights a lot...

[bomberkiller]

5. And etc...I hope your gentlemen enjoy my flights a lot...

Be sure, I do! 

 

Gerhard

[cgagan]

Many thanks gunny for your hard work and dedication to our gaming pleasure! 

[gunny0134]

Congratulations on the release of skin master Stanislao's Ki-61-I Hien (Tony) 2046 resolution skins...!!

So I upload my final update Ki-61-I pack.

  - I applied the cockpit file of Jcat's Ki-61-I Tei.
     * Thank you Jcat for making a good graphic file.
  - Some devices such as a throttle and radio were added.

Just put them in the Japan pilots folder of Ranwers and replace them with the files that were there.

Tested only 4.12.2m, BAT 4.0.

So refer to this part.

https://www.sas1946.com/main/index.php/topic,69200.msg763136.html#msg763136

내려받기 = Download
http://naver.me/FRWXpDp8

Thank you...!!!

[stanislao]

   Thank you Gunny, downloaded and installed!