Special Aircraft Service

Individual Mods and Packs for IL-2 1946 => Other Mods => 3Dfix => Topic started by: Red_Fox90 on March 14, 2014, 05:47:59 AM

Title: Refined 3D for Finnish Brewster B-239 "Taivaan helmi"
Post by: Red_Fox90 on March 14, 2014, 05:47:59 AM

**********************************
Finnish Brewster B-239 "Taivaan helmi"
**********************************

Following a request by Cuccos19 ;)

(https://www.mediafire.com/convkey/8fe8/ebsf1bsae1gue434g.jpg) (https://www.mediafire.com/view/ebsf1bsae1gue43/b-239-3.jpg)

Overhauled 3d for Finnish B-239 only at the moment (US/UK/Dutch version will follow later on).

Credits:
Original mesh by 1C
New pilots by Wolfighter
New wheels 3d and texture by PA_Jeronimo
New 3d by Red_Fox90

Instructions: unzip and add the folder in your #DBW or #SAS mods folder.

Download: https://www.mediafire.com/download/p8m3w5x4zpvojbk/Brewster_B-239_Taivaan_Helmi_Revised_3D_14314.7z (https://www.mediafire.com/download/p8m3w5x4zpvojbk/Brewster_B-239_Taivaan_Helmi_Revised_3D_14314.7z)

S!

Title: Re: Refined 3D for Finnish Brewster B-239 "Taivaan helmi"
Post by: BravoFxTrt on March 14, 2014, 09:43:07 AM

Thank you Red and all involved.

Title: Re: Refined 3D for Finnish Brewster B-239 "Taivaan helmi"
Post by: Gaston on March 14, 2014, 10:11:00 AM

Thanks ! Is it compatible with the existing skins, or have they become obsolete ?

Title: Re: Refined 3D for Finnish Brewster B-239 "Taivaan helmi"
Post by: cgagan on March 14, 2014, 11:28:54 AM

Great job, however, I get a considerable fps drop with it in my SAS ModAct5.30 setup
EDIT: Problem solved, obviously a mod conflict; I moved it further up in my #SAS mods hierarchy and I enjoy happy flights!

Title: Re: Refined 3D for Finnish Brewster B-239 "Taivaan helmi"
Post by: Fresco23 on March 14, 2014, 01:12:21 PM

hmmm.. mine is not showing at all... very odd.. ill look at it later though, its off to work now..

I assume its a cowling, cockpit, or wheels conflict.. as I have mods for the 239 in all those areas....

Title: Re: Refined 3D for Finnish Brewster B-239 "Taivaan helmi"
Post by: cuccos19 on March 14, 2014, 01:27:12 PM

Oh, what we have here since I visited last time! :o Thank you very much Red and everyone involved, I try it right now! :D

Title: Re: Refined 3D for Finnish Brewster B-239 "Taivaan helmi"
Post by: Gumpy on March 15, 2014, 01:22:17 AM

(http://i61.tinypic.com/1z3xa9d.jpg) Very nice,thanks Red.  8)

Title: Re: Refined 3D for Finnish Brewster B-239 "Taivaan helmi"
Post by: Epervier on March 23, 2014, 03:45:12 PM

Thank you very much for this update !


But... I have little little buggounet with propelor in 409/UP2.01 !
It is not centered!
It is slightly too high!

I have changed in Plane hier.him:
instead of

[Prop1_D0]
...
Attaching -1 0 0 0 -1 0 0 0 1 -0.0036 -1.51196 0.06102

by

[Prop1_D0]
...
Attaching -1 0 0 0 -1 0 0 0 1 -0.0036 -1.51196 -0.01

Title: Re: Refined 3D for Finnish Brewster B-239 "Taivaan helmi"
Post by: Repetier_71 on April 30, 2014, 05:35:01 AM

Sir  Red_Fox90
My appreciation and respect for your work. Brewster is now just beautiful. Is it possible to have hope in the future versions of the US/UK?.
Best regards

Title: Re: Refined 3D for Finnish Brewster B-239 "Taivaan helmi"
Post by: SAS~Malone on May 01, 2014, 12:55:17 AM

nice!
i need to ask, though, as i know little about these planes, but in what way does this variant differ from the one we have in-game already?

Title: Re: Refined 3D for Finnish Brewster B-239 "Taivaan helmi"
Post by: Repetier_71 on May 01, 2014, 03:33:54 AM

There were differences, the largest of these: other drive units (F2A-1, Wright R-18020-34) (F2A-2, Wright R-18020-40) the other engine casing, the length of the engine compartment to the cab. Dimensions, F2A-1 is longer than the F2A-2 by 5 inches and F2A-3 by 10 inches, were used for treatment of the cap shell, propellers, windows hull shape. That's the most important ones.
Best regards

Title: Re: Refined 3D for Finnish Brewster B-239 "Taivaan helmi"
Post by: Ace on May 01, 2014, 07:22:08 AM

Thanks, REd Fox!

Title: Re: Refined 3D for Finnish Brewster B-239 "Taivaan helmi"
Post by: bestekampfpilot58 on November 12, 2016, 06:33:24 AM

Hi SAS~Epervier,

I went looking for this file....[Prop1_D0] and I did find it. But, I did not find this....Attaching -1 0 0 0 -1 0 0 0 1 -0.0036 -1.51196 0.06102
IN the file? I had wanted to center the Prop spinner...Am I doing some thing wrong?  o_O    :-[
I recently re-installed Red Foxes Buffalo 3D update and I did notice that the spinner was off-center...
Any ideas?    o_O
Thanks!

Quote

SAS~Epervier

Thank you very much for this update !


But... I have little little buggounet with propelor in 409/UP2.01 !
It is not centered!
It is slightly too high!

I have changed :
instead of

[Prop1_D0]
...
Attaching -1 0 0 0 -1 0 0 0 1 -0.0036 -1.51196 0.06102

by

[Prop1_D0]
...
Attaching -1 0 0 0 -1 0 0 0 1 -0.0036 -1.51196 -0.01

Title: Re: Refined 3D for Finnish Brewster B-239 "Taivaan helmi"
Post by: vpmedia on November 12, 2016, 06:39:36 AM

Quote from: bestekampfpilot58 on November 12, 2016, 06:33:24 AM

I went looking for this file....[Prop1_D0]

edit the hier.him

Title: Re: Refined 3D for Finnish Brewster B-239 "Taivaan helmi"
Post by: bestekampfpilot58 on November 12, 2016, 09:01:07 AM

vpmedia,

Thanks a LOT!!  ;D

Once I knew where to look it was a 5 minute change! Now the B239 looks even better!!  :D
Thanks, appreciate the info....