Loading [MathJax]/extensions/Safe.js
Special Aircraft Service
Individual Mods and Packs for IL-2 1946 => Other Mods => WIP => Topic started by: Zflyer48 on February 27, 2023, 07:04:40 AM
-
Koolhoven F.K. 52
(https://i.postimg.cc/4NXGsFYK/Fk52-03.jpg)
General characteristics
Crew: 2
Length: 8.25 m (27 ft 1 in)
Wingspan: 9.8 m (32 ft 2 in)
Height: 3.3 m (10 ft 10 in)
Wing area: 28.4 m2 (306 sq ft)
Empty weight: 1,650 kg (3,638 lb)
Max takeoff weight: 2,500 kg (5,512 lb)
Powerplant: 1 × Bristol Mercury VIII 9-cylinder air-cooled radial piston engine, 625 kW (838 hp)
Propellers: 3-bladed variable-pitch propeller
Performance
Maximum speed: 380 km/h (240 mph, 210 kn)
Cruise speed: 308 km/h (191 mph, 166 kn)
Range: 1,130 km (700 mi, 610 nmi)
Service ceiling: 9,800 m (32,200 ft)
Armament
Guns:
2 × forward-firing 7.7 mm machine guns in wings
Bombs:
150 kg (330 lb) of bombs
Basic WIP model
(https://i.postimg.cc/hjvZPT97/2023-02-27-13-43-19.jpg)
(https://i.postimg.cc/8CXQH14M/2023-02-27-13-43-26.jpg)
(https://i.postimg.cc/L41KtF1g/2023-02-27-13-43-33.jpg)
(https://i.postimg.cc/ZRN7dZMT/2023-02-27-13-43-41.jpg)
-
Magnifico!!! Thx
-
;D Well done! Thank you !
P.S. I think it would be nice to have a little tweak to the attachment of the lower wings and the horizontal fletching... they should widen out into a truncated cone shape before fitting with the fuselage.
-
muy bueno excelente.
-
Out of the Baltimore and into the Koolhoven. Looks great!
-
Superb! Bravo 8)
-
WIP Sample
https://www.mediafire.com/file/8h5euptrp6xr5lk/Koolhoven_FK52_WIP-1.zip/file
FK_52 air.FK_52 2 NOINFO g01 SUMMER
Some more work to do.
Screenies
(https://i.postimg.cc/cLHd1dnm/2023-03-05-13-47-07.jpg)
(https://i.postimg.cc/SQf4WnLd/2023-03-05-13-52-09.jpg)
(https://i.postimg.cc/m2p0wCPY/2023-03-05-13-52-20.jpg)
-
Thank you, very much,Zflyer48 8)
Best Regards,
Piotrek
-
Nice aircraft choice.
Kopfdorfer
-
Very nice!
-
There will be another version of the FK 52. This I will name FK 52(F) for the Finnish model.
Will have different Nose, Keel/Rudder, and Blister. Working on the latter two.
Both versions will be released at the same time.
(https://i.postimg.cc/BQ8BQJfH/2023-03-07-18-25-35.jpg)
-
Great news ]thumleft[, I had missed the fact that these were two different versions :P
-
Looking forward Zflyer. Quote from Wiki:
During the Winter War, the Swedish Count Carl Gustav von Rosen purchased two Koolhoven aircraft and gave them to the Finnish Air Force . The aircraft were flown to Finland on January 18, 1940 with codes KO-129 and KO-130. In March 1940 they bombed and fired on Soviet troops attacking across the ice towards Virolahti. During the Winter War, they totaled about 15 combat flights. Both FK.52 aircraft were hit by enemy fire.
In 1941, the planes were used by LeLv 6 in the Hanko area. Both aircraft were destroyed during the Continuation War , KO-130 was lost during a leaflet-dropping mission over Hanko and made a forced landing 80 km south of Tallinn, Estonia on August 16, 1941.Both crew members died in the crash. Estonian Forest Brothers guerrillas burned the plane and buried the crew in Velise .
The second plane, KO-129, was destroyed in an accident in 1943. The pilot jumped out and survived. The plane crashed north of the village of Pernaa in Kauhava .
The plane's nickname was Kolho , "clumsy".
-
Great choice of another interesting but little known type, to me at least. Yhank you very much, really appreciated. 8)
Take care and be safe.
Wishing you all the very best, Pete. ;D
-
Getting very close. A few mesh issues in cockpit and then the wpn load.
(https://i.postimg.cc/13KrNsjm/2023-03-12-20-45-09.jpg)
(https://i.postimg.cc/HxFwCxV2/2023-03-12-20-45-27.jpg)
-
Nice work 8) ]thumleft[, will FK-52 get Dutch and Finnish bombs?]
Best Regards,
Piotrek
-
FK 52 + 52(F) Beta
https://www.mediafire.com/file/h5v3mfaqe88epaf/Koolhoven_FK52-Beta.zip/file
air.ini in Read Me.
Delete older versions and air.ini
Still some minor issues and what ever is reported before Alpha.
Templates for both to follow.
Enjoy
(https://i.postimg.cc/mDYyCKTG/2023-03-13-19-39-12.jpg)
(https://i.postimg.cc/nL74fNjQ/2023-03-13-19-39-49.jpg)
-
know its a beta, put it in and the finish one does not show though its listed in drop down menu. Using BAT 4.2.2 with patch 4
-
I need a little more than "it does not show". What does the Logfile show?
-
Most likely that the plane is not showing up in the Arming screen of QMB even if it is selected from the drop down list in QMB main screen
-
*** Looking for Render API Extensions ...
[-] 'GL_EXT_paletted_texture' extension - Palettized textures (8 bit RGBA palette).
[-] 'GL_EXT_compiled_vertex_array' extension - Compiled Vertex arrays.
[-] 'GL_EXT_clip_volume_hint' extension - Frustum clipping optimization.
[x] 'GL_EXT_secondary_color' extension - Secondary Color for 3D fog & specular optimization.
[x] 'GL_EXT_separate_specular_color' extension - SeparateSpecular for 3D fog & specular optimization.
[x] 'GL_ARB_multitexture' extension - Multitexturing.
[x] 'GL_EXT_texture_env_combine' extension - Multitextures advanced combining for special effects.
[x] 'GL_NV_texture_env_combine4' extension - Multitextures advanced combining for special effects.
[x] 'GL_EXT_texture_env_dot3' extension - Dot3 Bump advanced combining.
[x] 'GL_NV_depth_clamp' extension - Corrects Shadows rendering
[x] 'GL_NV_texture_shader' extension - NV Pixel Shaders
[x] 'GL_ARB_texture_compression' extension - Saves texture memory by 400
[x] 'GL_EXT_texture_filter_anisotropic' extension - Anisotropic texture filtering.
Maximum texture size : 8192
Maximum simultaneous textures :4
MaxAnisotropic (1.0 = none) : 16.000000
15 Splashscreens available.
WARNING: ****( Unexpected txr reload (tfMipmap): '3DO/arms/sc-50/skin.tga'
*** IL-2 Selector 4.0.2.3 Build 21070901 loaded ***
SAS Common Utils Game Version = 4.122
ScreenMode Library Version 0.01 loaded successfully.
Initializing DirectSound playback device...
Primary buffer created.
Playback format is set : sampling rate = 44100, num channels = 2.
Not enought hardware buffers (0), hardware disabled
Buffer caps : Transfer rate = 0, CPU overhead = 0.
Default speaker config is : 1310724.
Direct sound audio device initialized successfully :
DX Version : 7
Hardware - disabled [buffers : 0]
Extensions - enabled :
EAX ver. 1 [ ] - disabled
EAX ver. 2 [ ] - disabled
EAX ver. 3 [ ] - disabled
I3D ver. 2 [ ] - disabled
ZoomFX [ ] - disabled
MacroFX [ ] - disabled
SIMD render [X]
num channels 16
Cannot open audio file samples/infinite 1
Loading mission QuickQMBPro/dlv_Philippines41_44/dlv_Philippines41_44bluenonen00.mis...
Y=1940 / M=6 / H= 12 , Temperature - 0m = 36.0 .
Loading map.ini defined airfields:
Load bridges
Load static objects
##### House without collision (3do/flora/palms/LiveAg2.sim)
##### House without collision (3do/flora/palms/LiveAg1.sim)
##### House without collision (3do/flora/palms/LiveBg2.sim)
##### House without collision (3do/Buildings/Port/Floor/live.sim)
##### House without collision (3do/Buildings/Port/BaseSegment/live.sim)
##### House without collision (3do/flora/palms/LiveAs2.sim)
##### House without collision (3do/flora/palms/LiveAs1.sim)
##### House without collision (3do/flora/palms/LiveBs2.sim)
##### House without collision (3do/flora/palms/LiveBg1.sim)
##### House without collision (3do/flora/palms/LiveBs1.sim)
##### House without collision (3do/Trains/PRVZb_B/body.sim)
##### House without collision (3do/Buildings/46/Trench2/live.sim)
##### House without collision (3do/Buildings/46/Trench1/live.sim)
##### House without collision (3do/Buildings/46/Trench8/live.sim)
##### House without collision (3do/Buildings/46/Trench4/live.sim)
##### House without collision (3do/Buildings/Furniture/Sandbag_Wall/live.sim)
##### House without collision (3do/Buildings/46/Trench3/live.sim)
##### House without collision (3do/Buildings/46/Trench7/live.sim)
##### House without collision (3do/Buildings/46/Trench6/live.sim)
##### House without collision (3do/Buildings/46/ATTrench1/live.sim)
##### House without collision (3do/Buildings/46/ATTrench2/live.sim)
INTERNAL ERROR: HierMesh: Can't find chunk 'pilotarm2_d0'
INTERNAL ERROR: HierMesh: Can't find chunk 'pilotarm1_d0'
INTERNAL ERROR: HierMesh: Can't find chunk 'pilotarm2_d0'
INTERNAL ERROR: HierMesh: Can't find chunk 'pilotarm1_d0'
INTERNAL ERROR: HierMesh: Can't find chunk 'pilotarm2_d0'
INTERNAL ERROR: HierMesh: Can't find chunk 'pilotarm1_d0'
INTERNAL ERROR: HierMesh: Can't find chunk 'pilotarm2_d0'
INTERNAL ERROR: HierMesh: Can't find chunk 'pilotarm1_d0'
1>mp_dotrange FRIENDLY DOT 14.000001 COLOR 6.0000005 RANGE 6.0000005 TYPE 6.0000005 ID 6.0000005 NAME 6.0000005 ALTICON 0.1 ALTSYMBOL + ALTCOLOR 0
1>mp_dotrange FOE DOT 14.000001 COLOR 6.0000005 RANGE 6.0000005 TYPE 6.0000005 ID 6.0000005 NAME 6.0000005 ALTICON 0.1 ALTSYMBOL + ALTCOLOR 0
Mission: QuickQMBPro/dlv_Philippines41_44/dlv_Philippines41_44bluenonen00.mis is Playing
WARNING: TRenderManager::TriangleList_ProjectiveShadow()- internal buffer overflow.
Too many vertexes or faces per shadow hier mesh!
Time overflow (0): speed 0.8695652
WARNING: TSmokeTrail::TSmokeTrail() Estimated number of particles 30 was clamped to (1 .. 8)
WARNING: TSmokeTrail::TSmokeTrail() Estimated number of particles 30 was clamped to (1 .. 8)
[Mar 14, 2023 2:39:49 AM UTC -4] -------------- END log session -------------
Edited by Epervier
-
@dsawan
I know you are new to this site... you have never seen the use of LOG posts... ]violent1[
- Read how to get the log here (https://www.sas1946.com/main/index.php/topic,13457.0.html), and the instant log here (https://www.sas1946.com/main/index.php/topic,19308.0.html) (Except for BAT which contains InstantLog).
- When you want to post only the relevant parts from the log
read here (https://www.sas1946.com/main/index.php?topic=39780.0) how to do this. (code option!)
- If you want to post all lines of the logfile we suggest to use https://pastebin.com/
to paste your log and then paste the link here which you got from them.
Read and see here (https://www.sas1946.com/main/index.php/topic,39780.msg627220.html#msg627220) how to do this.
Note: It is preferable to provide the LOG in its entirety!
Too many vertexes or faces per shadow hier mesh!
-
@ Zflyer48
I think your "readme" would be better like this:
FK_52 air.FK_52 2 NOINFO du01 SUMMER
FK_52(F) air.FK_52F 2 NOINFO du01 SUMMER
-
My apologies to the community. Typo. Blind in one eye; can't see out the other.
Thank you, Epervier
air.ini
FK_52(F) air.FK_52F 2 NOINFO du01 SUMMER
Zflyer48
-
Thank you very much, Zflyer 8), the airplane flies good in Vp modack, but I have a few bugs,
in QMB after loading the mission, when I turn on the aircraft preview, only FK-52(F) is visible despite the FK-52 setting on the red side and FK-52(F) on the blue side,
there is no difference in the appearance of the FK-52 and FK-52(F) engine cover,
[6:49:04 PM] INTERNAL ERROR: HierMesh: Can't find chunk 'pilotarm2_d0'
[6:49:04 PM] INTERNAL ERROR: HierMesh: Can't find chunk 'pilotarm1_d0'
[6:49:04 PM] FM called 'FlightModels/FK_52.fmd:FK_52_FM' is being loaded from File: 'fk_52_fm'
[6:49:04 PM] FM called 'FlightModels/BMW_132_Series_Hs:FK_52_FM.emd' is being loaded from File: 'fk_52_fm'
[6:49:04 PM] Flight Model File FlightModels/FK_52.fmd:FK_52_FM contains no Mach Drag Parameters.
[6:49:04 PM] FM called 'FlightModels/FK_52.fmd:FK_52_FM' is being loaded from File: 'fk_52_fm'
sorry for my english,
Best Regards,
Piotrek
-
Both planes work off the same FM. They have nothing to do with which meshes display only flight
behavior.
Meshes are control by which air.ini is called. I have made two version of the FK 52: FK 52 and FK 52(F).
There two air.ini in the Read Me.
FK_52 air.FK_52 2 NOINFO du01 SUMMER This for the FK 52
FK_52(F) air.FK_52F 2 NOINFO du01 SUMMER (Corrected one for FK 52(F))
I can not duplicate mentioned problem.
Screenies show both versions in QMB red and blue select from my computer.
(https://i.postimg.cc/k47krqBD/2023-03-15-01-41-29.jpg)
(https://i.postimg.cc/fTV1QHT7/2023-03-15-01-41-52.jpg)
(https://i.postimg.cc/Y0hDk9k2/2023-03-15-01-42-05.jpg)
(https://i.postimg.cc/MGqsHtxF/2023-03-15-01-42-53.jpg)
(https://i.postimg.cc/fyGCNfB5/2023-03-15-01-43-48.jpg)
-
was just a typo FK_52(F) air.FK_52F 2 NOINFO du01 SUMMER fix :-* ;D
-
@ Zflyer48
Sorry for the confusion, I made a mistake when copying the entry to air.ini :-[,
now the aircraft works perfectly, Finnish as well as Dutch version,
Best Regards,
Piotrek
-
Alpha version, now, in Other-Singles.
Enjoy
ZFlyer48
-
Cool, I had to look it up on Wikipedia.