I am getting a memory error with #DBW_MOD_Aircraft. The install is clean and I have verified the problem only exists with this one, I also activated all of the mods in the same order as depicted on page #1 of this thread. The error occurs at 70%
Hi flybywire,
If you are receiving an error at 70% game load, I would double check the "cleanliness" of your air.ini file relative to any other aircraft related mods which may be or have been installed. Best way to identify would be to disable all mods in GME so none are active. Then, open your air.ini in a compare program such as winmerge and see how it compares against the air.ini which shipped with the DBW 1.7 and/or 1.7.1 installer. If both match, then recommend checking the other associated inis tied to the Aircraft pack (as noted in the readme found in the "documentation" folder of the pack. If everything still matches, then next would be to look in your #DBW folder and ensure there is nothing in there except for the mapmods folder, STD, and XTD.
The goal being to ensure that indeed your install is "Clean" DBW 1.7.1.
If you are receiving a 70% load error, it is tied to a disconnect somewhere with likely an aircraft mod/class entry which may have been previously installed and some element of it is remaining in the #DBW core folder.
Also another test after ensuring in DBW is 1.7.1 clean, would be to try the aircraft pack alone by itself.
All in all, try a few different tests, and look to ensure indeed your install is "clean" before enabling any jsgme packs.
Keep me posted if you get it to work.
~S~
wind