Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Birdman]

An error appears when I extract the files (it says  "Unknown Method in +P40Cod....") in the MODS folder. I did add the corresponding lines but my game won't open. The files on the ZIP file are corrupted, broken. If they weren't corrupted the error wouldn't appear when I extract them. Could someone please re upload the file to Mediafire?

If you mean the 7z pack from Mediafire, then looks like you have outdated version of 7zip. Just update your 7zip and try again. The pack itself should be OK but it uses compressing method that is not supported by older 7zip versions.

[vegetarian]

Yep, installed successfully on ModActv4.0 version of 4.11.1. This is one of my favourite mods.

[BravoFxTrt]

If your using HSFX, you'll want these. They work in HSFX and are alot better than the old Stock ones.

[WindWpn]

Of note regarding installation into HSFX. 

HSFX has its own buttons which has been tuned specifically for HSFX.  The P40E and M updates per this mod will work correctly without any change to the HSFX buttons, however if you wish to include the additional P40s, then the latest SAS buttons (note buttons file affects sounds and flight modeling) is required. 

I currently have attempted to remain with the HSFX buttons for my WWII period install while complementing air additions with AutoDiffFM if an air model includes it own FM.  However, if not, then the plane will have to be excluded from the air.ini allowing the game to load without those plane additions.  In the case of this mod for HSFX, I only added the mod itself while not adding the air.ini additions.  However, I did add the loadout additions for the E and M models as they are included in HSFX.

Thus for the E and M models running stock HSFX buttons, they look great!

~S~
wind

[Steven190]

I have a problem with the P-40F,L,N. as soon as I click fly and the game loads the P-40 explodes. This is in my install SAS Mod 4 and HSFX.
In this folder I have the AutoDiffFM and the SAS Engine_Mod_4111m_v26. Would they effect this issue?
The install for DBW works great.
 I have looked through his thread and did not see anyone with this issue.

Any ideas?

[WindWpn]

I have a problem with the P-40F,L,N. as soon as I click fly and the game loads the P-40 explodes. This is in my install SAS Mod 4 and HSFX.
In this folder I have the AutoDiffFM and the SAS Engine_Mod_4111m_v26. Would they effect this issue?
The install for DBW works great.
 I have looked through his thread and did not see anyone with this issue.

Any ideas?

You also need the 10.3 buttons.  AutoDiffFM will not work since the pack does not include the individual FMs for each P40.

Note, If you do want to maintain the HSFX buttons (for example if you are using UV3 Expert), the simply do not include the F,L,N models in your air.ini update.  The E and M which are stock in HSFX will still be updated with loadouts and 3d fixes.

~S~
wind

[Steven190]

I have the buttons 10.3 installed in the SAS folder, I will also remove the AutoDiff from the HSFX to see what happens

[Steven190]

Well I tried taking out the AutoDiffFM and the game crashes at 70%

What I am working with is a SAS Mod4_HSFX 6.0.17 game.
The SAS Mod game loads and works except for the P-40F explodes. The HSFX side with the P-40 (not in the Mods folder), it loads but now in Quick Mission, it starts to load, then gets a error message: Mission failed to load:null. Even putting the P-40 back in, the error for the failed load still comes up.

It was working until I was messing around with the AutoDiffFM, now it does it all the time even with the AutoDiffFm in or out and the +P-40 (changing the air.ini and plane_ru) in or out. I only have a few items in the Mods folder. What I have is the Me-109 cockpit, the Me-262 cockpit, the F4U cockpit and a gun sound file. Which were all working before I tried the P-40. Not saying that this was the cause, just a frustration in what is going on. The exploding plane is still a mystery now with another problem.

[Epervier]

The exploding plane is still a mystery now with another problem.

Inconsistency in the buttons or external FM. The call for the engine (emd file) is incompatible.
"Compatible 411" does not mean that it is "compatible HSFX6".
Especially if you use the "expert" mode.

[Whiskey_Sierra_972]

Does anyone else have a memory problem with this mod? I get the famous [the instruction at "0x5ed0530e" referenced memory at "0x0000051c"] error message prior to CTD at some point during my P-40 flights. Not immediately, but inevitably sometime. Reducing numbers of aircraft in the air.ini files doesn't seem to do anything. Any ideas? I really love the new P-40N visual model, by the way!

I get the same error message too, but only when the P-40's are damaged or destroyed. So maybe it has something to do with damage model?
(I'm using 4.09m UP2.1)

The only way to counter this problem now is to.... NOT GET SHOT!! lol 

  hello

I have the same problem as glibble.


 someone has a solution?

I discover the same situation in my 409 game version!

This happen on all P40 from E to N and is related to something that the plane do after being hit when in enemy side (red).

I got it almost immediately in desert on line blue none mission with 4 KI-43Ic vs 4 P-40E letting AI drive my plane from start.

As the planes shoot each other in the first frontal passage the memory error happen....or in the next few minutes....

For me reverting to my old P40 mods solve the issue!

BTW tested in 410 the error never happen!

[WindWpn]

Solution is to not include the "new" P40s in your HSFX install if you are sticking to the HSFX buttons.  Basically, to use the new P40s requires the SAS 10.3 buttons, however, then you lose the HSFX FMs along with Tiger's sound if using that too. 

All in all, its a choice.  However, one thing you can do (I did this) is to include the mod, but do not add the air.ini entries for the "new" P40s.  You will still get the upgrades for the E and M, but will bypass the other "new" 40s.

Kind of a compromise.

~S~
wind

[Loht773]

This mod is great! Thank you!

I'm having a problem, my game crashes when I open the Canopy on the P-40. I think there was a previous mod which enabled the canopy to open and it's interfiering with the new one. I can't find it!

Could anyone please help me?