Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Ala13_Kokakolo]

I start:

Two bugs:

Fisrt: Bf 109 b1 propeller pitch does not work (is this intentional? Seems weird, the plane damage its engine as soon as you go over 85% without lowering the pitch)

Second: May be is only my install, and actually I do not care because i do have multiple installs, but does the game work for you when you run the game in the stock 4.11.1 mode? In my install it launches the game but as soon as I click on quickgame it freezes.

[Semor]

I Follow...

The Compass in the early Bf-110 is not working.
The cockpit in the early Bf-110ers has been reworked,but the rear gunner is missing in cockpit view!

To be continued.....

[CWMV]

BF-109B-1 had a fixed two blade wooden prop, no pitch adjustment.
Except for those that were retrofitted with the B-2 prop, but I don't think that's the model here is it?

[kowi76]

Gunsight-Reticle in J2M3 and J2M5 seems to be too high.

[stugumby]

1. hs 123, if it has radiator and prop pitch controls they arent working, also dosnt cut out at neg G manuvers
2. swordfish same for prop and radiator controls
3. gladiators with 3 blade props, same as swordfish
4. tbd no bombsight for level bombing and no way to open sight door?

[stugumby]

Command and control mod, what are the max radar distances?, im using an older mission built with gci in meters and with sn-2b radar icons but the ground radar dosnt pick up the red halifax. My radars are set to blue as is my aircraft, bf110g4.

artillery icons are working fine just the radars acting up.

[Dauntless1]

Fw-190 A4 ATA has the gear struts outside the gear cover until gear closes.
None of the other Fws does it.
Alignment for the Corsairs smoke and flame is off, it's forward of the exhaust, on the radiator cowl.
Alignment for smoke and flame is off for the Yaks also! Sits below the exhaust pipes.
Looks like there are a few others.

[242Sqn_Cat]

1. hs 123, if it has radiator and prop pitch controls they arent working, also dosnt cut out at neg G manuvers
2. swordfish same for prop and radiator controls
3. gladiators with 3 blade props, same as swordfish
4. tbd no bombsight for level bombing and no way to open sight door?

The Swordfish and Gladiator both have fixed-blade props and no radiators... maybe the Hs123 is the same?
No, there isn't a bombsight for the TBD. This isn't a bug - it just wasn't possible to add it. It will be added if and when cockpits are made for the TBD rather than re-used from another plane. Remember, this is an AI-only plane in 4.11.1.

:cheers:

[stugumby]

Yes quite possible but in hsfx 5 the swordfish and gladiator had rad and prop controls, not a earth shaker but just something i came across. there is lots of good fun ahead with hsfx 6, sorry if my quibles sound like whining. thanks for your quick reply.

[242Sqn_Cat]

Yes quite possible but in hsfx 5 the swordfish and gladiator had rad and prop controls, not a earth shaker but just something i came across. there is lots of good fun ahead with hsfx 6, sorry if my quibles sound like whining. thanks for your quick reply.

Yes they did, but shouldn't have.    No problems btw, I didn't see it as whining. There are a lot of little things between the versions that aren't in the readme.
:cheers:

[mellow214]

Well I got some problems with HSFX 6.0. I disabled all of the mods I used with 5.0 and then patched IL-2 from version 1.10.1 to 4.11m and then to 4.11.1, I tested the game with version 4.11m and tryed out the QMB which froze the game, tryed again with the 4.11 hotfix and then 4.11.1 with the same results. I installed HSFX 6.0 and the QMB works until the mission loading gets to 100% and I then get the "The instruction at "0x26180a57" referenced memory at "0x2c6b8978". The memory could not be "read"." error.
If this error cannot be fixed I'll try to re-install and repatch IL-2 and start over again to see if I get the same results.

[242Sqn_Cat]

I tested the game with version 4.11m and tryed out the QMB which froze the game, tryed again with the 4.11 hotfix and then 4.11.1 with the same results.

There's no point in installing v6.0 if your game's already freezing. Try an install of v6.0 onto a clean 4.11.1, but don't forget to save your personal stuff so that you can transfer it over.
:cheers: