Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[SAS~Malone]

Claw, i don't know if that last post of yours is really relevant to the topic at hand.
perhaps better to post about that in the tech help: hardware section?

[SAS~Gerax]

Anyone ever have trouble with the whole screen shaking when this mod is activated?

yes. had this when I had wrong config.ini entries.
AFAIR I had to disable 3d. I think I had to edit this line:
PAL3DStart=0 (where 0 is 3d disabled). Try this. 

have a closer look into the mods readme how to set the parameters of this mod..

[Claw]

Malone

The reason I posted here is because the only time it happens is when the visual mod is activated and PAL3DStart=1. Other than that, everything else on my computer works fine including a DirectX 3D driver that I use. I know it's not not spacifically the visual mod because It worked fine with three other NVidia card in the same computer.

Gerax

That kind of defeats the purpose. Setting PAL3DStart=0 disables the 3D. I'm looking for a solution that will allow me to have 3D with PAL3DStart=1 and no side to side shaking.

Hope this clears things up.

Thanks

Bob

[benitomuso]

Well,
                    I think that this one should work OK. It is very pure, and eventually later I will adapt it to v4.111

  Regards,
                           Pablo

[benitomuso]

Malone

The reason I posted here is because the only time it happens is when the visual mod is activated and PAL3DStart=1. Other than that, everything else on my computer works fine including a DirectX 3D driver that I use. I know it's not not spacifically the visual mod because It worked fine with three other NVidia card in the same computer.

Gerax

That kind of defeats the purpose. Setting PAL3DStart=0 disables the 3D. I'm looking for a solution that will allow me to have 3D with PAL3DStart=1 and no side to side shaking.

Hope this clears things up.

Thanks

Bob

Claw, have you tested with both A and B stereo modes? You change them by holding the right mouse button and moving the wheel.

I haven't followed all the thread about your issue, but I think you are using a basic video card, right?

My code (specially in some modes) uses fast buffer pages copying of OpenGL, and it is quite probable that come video cards cannot cope with it.

Regards,
                       Pablo

[BravoFxTrt]

Its a keeper, I love it, way to go Pablo, Thanks.

[SAS~Malone]

yes, this version works just great.
many thanks, Pablo - as always, much appreciated

[Claw]

Pablo

See thats whats confusing. I've used a 7600gt, 9800gt, and GTX 560 all with no trouble. After I installed the GTS 250, thats when the trouble began. Yes I ran Driver Sweaper and CC Cleaner as I always do. The GTS 250 really isn't a bad card. It's between a 9800GT and a 9800 GTX. The card isn't getting hot. They are known for being a little hot but I fixed that. The hottest it gets now is around 65c on a hot ambient day.

Holding the right mouse button and moving the wheel had no effect. Changing to PAL3DStart=2 fixed it. I tried holding the right mouse button and moving the wheel with PAL3DStart=2 and still had no effect.

Whats different between A and B mode?

I'm glad it's working though. It looks great

Thank you

Bob

[Claw]

Pablo

Thanks for the updated version. I still have to use PAL3DStart=2 with this card but tracking fix works great. Very nice.

Thank you

Bob

[benitomuso]

The difference is internal on how the frames are composed. it deals at a low level with video card operations. So there are different approaches that under some conditions would be better.

The modes are explained in the doc, at some level of detail, but it is kind of impossible to detail how technically work each one, it would be a non-sense for most of the people.

I explained it wronf: the way to alternate the Rendering mode is with the two buttons pressed and the Wheel.

Regarding rendering, in most of the video cards you will realize that the Mode B fully uses the anti-aliasing settings of the card, even kind of improving it. It is the mode I prefer (that's the one you select with PAL3DStart=2).

Pablo

[BT~walker]

Works like a charm... Thank's for this !

[Claw]

That explains why it looks so good. I thought I was imagining that the AA looked better with your MOD but I wasn't. It does look great.

Thanks for clearing that up and helping me get it working.

It's all working great now

Thank you

Bob