Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[c_jephcott]

Ok, now I've managed to get it all working - apart from the Flyby sounds. So I've delved back into the conf.ini file and changed the line as requested by the fix - and then deactivated and reactivated.

But the Flyby sounds still aren't there. I'm going to have a good look again through this thread and see what fixes there are!

[saab ja26]

This has worked for me with restoring the fly-by sounds originally when running DBW 1.7.1 and I had to do it again when I installed the Full Monty Packs. I set my Landscape detail to perfect and for some reason the fly-by sounds activated. As soon as I turned off perfect settings they went away. Anyhow this worked for me hopefully it will help you.

[Razgriz_37]

This has worked for me with restoring the fly-by sounds originally when running DBW 1.7.1 and I had to do it again when I installed the Full Monty Packs. I set my Landscape detail to perfect and for some reason the fly-by sounds activated. As soon as I turned off perfect settings they went away. Anyhow this worked for me hopefully it will help you.

=S= Same thing for me exactly how you put it, however they sound as if they were sped up. Like the x2 playback for the flyby sounds, still for some reason perfect settings allowed for the fly by to work. Weird.

[CWMV]

Think it has to do with number of planes.
Ive had the same issue with delayed fly-by sounds. The more planes the worse it gets.
But I dont fly from outside, so not an issue.

[LuseKofte]

This is the best and most realistic soundmod we have in my opinion. But I never get all the flybyes to work. From inside I have no problems. This I can live with, if you all read this topic you will see your problem and a probably solution for them. But some you have to live with

[BravoFxTrt]

Mick and Tiger, I have UV3 working in 4.11.1m Stand alone config, but I had to use the 4.09m + modact version (The Buttons didnt work, using with out hem so far), and its working perfectly, Thanks Guys.~S~

[BravoFxTrt]

There is a Delayed Fly-By fix/Patch at the OP. Under  Flyby delay fix

Edit, This is a great patch I like it better this way.

[TICI]

I have the same problem on HSFX 6.017. Everything works fine except ,when I have many planes in the vicinity, the flyby is temporary lost ( Sometimes you can only hear guns from other planes ) As soon as the number of the planes near you goes back to a lower amount the flyby comes back. This is the only glitch I can find in this beautifull mod ( The flyby delay fix doens't cure the problem ).
Hopefully there is a fix for it.
TICI

[Mick]

... are you sure you have the "AudioDevice" folder active, that is, do you have 64 channels instead of the stock game max 32 ...??

That's easy to check:

Open your conf.ini, and check in the [sound] section if you have :

[sound]
..........
..........

NumChannels=4 (if you have =2 then you're not using 64 channels, hence the flyby that disappear when too many planes around ...)

Another way to check, if your log says :

num channels 32

>>>> then you are not using the necessary 64 channels to avoid the flyby "bug" ...

[TICI]

Mick I have the NumChan at 4 ( 64 ), that was not the issue. I noticed that other people have the same problem, could it be the fact that I have an onboard Audio Card ( Realtek High Definition ) which has some sort of limitation ?.

TICI

[Mick]

... yep I think so, the only thing left to do is check if your audio drivers are up to date ...

Did you read what Mike Storebror wrote about onboard sound chips probs ? (page 1 of this thread)

Tiger has got a sound card, and developed UV3 with it of course, so he couldn't guess there would be such issues with onboard sound chips ...

I "only" had an USB external cheap sound stick (Terratec Aureon Dual USB Sound Card)  when I beta tested UV3 and experienced absolutely no prob with it ... 

[TICI]

The driver has been already update ( Now is 6.0.1.6662 ) I maybe try the realtek coded 2.70 as posted on the first page and see if it helps otherwise I can leave with it because the issue happens only the few times when I
have a large number of planes.
TICI