Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Benjamin2557]

Ok Maiko and thank you for all your answers and support. 
But I want to ask you one last question: Apparently, the fix fly-bye sound is not yet fixed. Except that I had found in the # DBW folder files new aircraft added by TFM, these files do not contain the "Samples" folder, or "Samples" should contain MP3 files to the sounds of airplanes. The problem does not he come there?  (I didn't installed "the full monty" here) :
 https://www.sas1946.com/main/index.php?topic=28809.0

But please Maico, how did you do to have sound of  fly-bye (after I leave you tranquil )

"Is making a w install an option?" ,  sorry I'm don't anderstand.

[Maico]

  Sorry, I mean making a new install.  Can you make a new install.  You should try to make a new one.
But before all that, lets take this step by step...
  If you did not install TFM, then why are you asking for support here...  I am confused..

"But please Maico, how did you do to have sound of  fly-bye (after I leave you tranquil ) "

I come here to be helped and I am glad that I can help you.... But step by step.
Have you done this?
[MOD]
flyby=1

In your CONF.INI check and change these settings to these values:

[sound]
Attenuation=7
SoundMode=2
SamplingRate=2
NumChannels=4
SoundFlags.hardware=1
 
  If you don't have TFM, then what is the point??
Maico

[Benjamin2557]

I didn't installed 'the full monty" here : https://www.sas1946.com/main/index.php?topic=28809.0 but  I installed "the New TFM" here : https://www.sas1946.com/main/index.php?topic=35424.0 (I think there are different and wanted to know if that was the cause of the bug)
Otherwise I would never have asked for help here if I had not 


I added this: Attenuation = 7         in the [sound] section of conf.ini and that at the very end : [MOD]   
                  SoundMode = 2                                                                                           flyby=1
                  SamplingRate = 2
                  NumChannels = 4
                  SoundFlags.hardware = 1                                                                         
               
It is correct ?


Installing as I do, the sound still does not work!

[Maico]

  Ok, I am with you now. 

 
I added this: Attenuation = 7         in the [sound] section of conf.ini and that at the very end : [MOD]   
                  SoundMode = 2                                                                                           flyby=1
                  SamplingRate = 2
                  NumChannels = 4
                  SoundFlags.hardware = 1                               

I hope not, In your sounds, you should have changed the numbers to what they are above.
Then at the end of the conf.ini
add :

[MOD]   
flyby=1
IF you don't have a [MOD] section
Go back to page one and read the part about conf.ini  Then this will all make sense.
I am glad we are both talking about TFM.

Good Luck!

[Maico]

Bravo,
  This is what happens to people like me, too lazy to read and too anxious to play instead of following instructions. 
PAGE ONE
"5) texcompress=2:  In your CONF.INI, be sure to check this line: texcompress=2.  Switching it to lower values will adversely affect performance.  Make sure you use it to avoid the dreaded slide show."

I changed my game from 0 to 2 and now I can count the rivets on the enemy planes.  What a big difference. 

[BravoFxTrt]

Glad you got it sorted Maico, now go become a multi Ace.

[SAS~Monty27]

I didn't installed 'the full monty" here : https://www.sas1946.com/main/index.php?topic=28809.0 but  I installed "the New TFM" here : https://www.sas1946.com/main/index.php?topic=35424.0 (I think there are different and wanted to know if that was the cause of the bug)
Otherwise I would never have asked for help here if I had not 


I added this: Attenuation = 7         in the [sound] section of conf.ini and that at the very end : [MOD]   
                  SoundMode = 2                                                                                           flyby=1
                  SamplingRate = 2
                  NumChannels = 4
                  SoundFlags.hardware = 1                                                                         
               
It is correct ?


Installing as I do, the sound still does not work!

Keep it Simple...

1) Test DBW using the Vanilla #DBW Folder (rename old one and replace)
2) Install New-TFM-01 and test.
3) Repeat with New-TFM-02 test.

It may seem a bit tedious but when it starts to work for you all will become clear.  Simple step by step method is the only solution I can advocate.

When helping people directly, on Skype for example, often the first thing to do is to get them to stop jumping around randomly and calm down.  Back to Square One.

Square One is not such a bad place, I have been there many times and it holds no fears. 

EDIT:
With specific regard to flyby sounds - The MAP is important too.  Some winter maps had to be specially fixed.  Which map are you testing on?

[Maico]

  I will like this on facebook LOL
  "It may seem a bit tedious but when it starts to work for you all will become clear.  Simple step by step method is the only solution I can advocate."

  Was there ever any other method?  No!  This is the way to go.  It took me a few days to get TFM all the way installed.  Along the way I asked questions, did back ups and surfed the internet while waiting for packs to upload.  Once uploaded, I launched the game, went to QMB and made sure things were working. 
  This is the way to go.

Thanks Monty27

Maico

[MJJWalsh]

Hi Monty

Just a note to say thanks for the help - Ace of Spades installed and working perfectly.  Decided to reinstall and re-enable the new TFM packs in proper sequence and everything is up and running smoothly - thought I'd have fps problems given how much I had installed - but having followed the advice in the earlier posts she is smooth and silky !  Which I can't say about my flying yet!  Just completed my first training flights in Ace of Spades.......I don't think those Poles will have too much to worry about!
Mike

[Maico]

  This is the best way to fly and die in IL2.  This week I got the scream when my guy got hit, the landing gear/hydraulic failure and a few other "Easter eggs".  The hard work was Most definitely worth it.   
  I reloaded my vid card drivers and corrected the texcompress=2.  This gave me a bunch more eye candy and smoothness.  I fly  8vs8 so smoothness is important.  In the Palau Map 8 P- 38 vs Ki it looks great.  The cannon and Mg sounds are so cool.
  I also found out you can use Tigers fly by and fly the plane towards the camera and fire the guns.  Looks and sounds amazing. 
  Im still on my P-38 kick and besides flying the Ki43/44/61 have not flown much else.  I did take a spin in the Mig-15.  If I live to be 100 I don't think I will see all the features in this New TFM.

  Outstanding.  I am so grateful

Maico

[Benjamin2557]

It works!!!! 
In fact, you had to install Engine Mod v2.6RC.  (Maybe I'm wrong). Have you installed it ??
I am very happy that it works and I can say a big thank you for all your support and your patience.    

I found mods added for new TFM, for example :

#DBW_1.71_New 412 FX
#DBW_1.71_Gurner FX
#DBW_DGen-MOD
#DBW_DGen-STAN
#DBW_Fw-190-A_FockeWulf's_Logo
#DBW_Fw 190 D-11 Flat Canopy
  RADIO SOUNDPACKS

and many more ...  Do you recommended them ?

[Maico]

benji:
  I am really happy you figured this out.  I hope you learned something, You have to read All of the instructions.  Not like me, I did not do number 5(see below) then I complained that I had low fps...    not good. 
               Now, lets practice some Safe Modding
  Rule 1.)  Make a Backup of the game somewhere safe.  Copy the game to a folder named for example "L2 backups" 
         2.) Did you do the following? If not, see page one again. 

FIXES AND EDITS

The odd thing might still crop up, this is the place for some simple edits, fixes and tune-up tips:

1) FOLDER:  ...#DBW/_0_0GearDamageFX V 1.3 - delete the following class file: F5F37ACE5B99838E (defective).

2) FOLDER:  ...#DBW/!_0_0TigersSOUNDSforDBW - RENAME TO - +0000_TigersSOUNDSforDBW for 3do improvements and fixes.

3) FOLDER:  ...#DBW/_Fix Cowling Engines & Prop Yak´s Spinners/Yak-3_VK107(Multi1) - delete the following files: gear2.mat - GearC1_D0.msh - GearL1_D0.msh - GearR1_D0.msh.

4) FOLDER:  ...#DBW/#DBW/_Fix Cowling Engines & Prop D3A - disable or delete this folder for 3D Mesh Fix.

5) texcompress=2:  In your CONF.INI, be sure to check this line: texcompress=2.  Switching it to lower values will adversely affect performance.  Make sure you use it to avoid the dreaded slide show.

  Let me know how it goes.  I would not mess with any new mods till you know the game is stable.

Maico