Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[tarrakanzz]

Hi! Work in 4.11.1 with Modact 4.0 :-)

[Stefan SG]

Thank You, Tarrakanzz.

Hi! Work in 4.11.1 with Modact 4.0 :-)

[Steven190]

Has anyone noticed that the pitot tube on the A-8, 9 and D-9's are on the wrong side?

They should be on the right wing tip.

[Darth_Dooboss]

This superb MOD works on 4.12+HSFX7?

Thanks, best regards!

[bestekampfpilot58]

Hi Stefan,

I'm running Il2 under 4.12m with modact 5.12 I installed this mod last night, it ran fine with no problems, until just about 30 minutes ago.
I ran a quick mission flying a 2048 texture P47 against two Fw190F-9/Pb fighters that carried 12-78mm rockets and 1 Ab 250.This combat
was at low altitude. I shot one Fw190F-9 down right away, and the pilot bailed out, BUT, he did not jettison his canopy, he bailed out THROUGH
the canopy!? In other words, he he bailed out, but the canopy did not come off the Fw190? 

I then tried the same mission with the Fw190F-8/Pb carrying only 12-78mm rockets. Once again when I shot down one of the Fw190s, the canopy did
not drop away from the Fw190, the pilot jumped out through the canopy. I also noticed that after I damaged the first Fw190, and engaged the
leader, that there was bullet hole damage on this first plane. After I engaged the damaged Fw190 again, the bullet hole damage had disappeared!!??  ???

What to make of this? I don't know..Any ideas? Rather odd, don't you agree?
Other wise, I enjoy flying all of these Fw190s.
Thank you for your attention
Horrido!

[Stefan SG]

Hi, Besterkampfpilot.

Most possibly this problem refers to using of 2048 textures. I had a lot of dogfights with there FW-190s and all worked flawlessly including jettisson. But I always used 1048 textures.

Best regards,
Stefan

Hi Stefan,

I'm running Il2 under 4.12m with modact 5.12 I installed this mod last night, it ran fine with no problems, until just about 30 minutes ago.
I ran a quick mission flying a 2048 texture P47 against two Fw190F-9/Pb fighters that carried 12-78mm rockets and 1 Ab 250.This combat
was at low altitude. I shot one Fw190F-9 down right away, and the pilot bailed out, BUT, he did not jettison his canopy, he bailed out THROUGH
the canopy!? In other words, he he bailed out, but the canopy did not come off the Fw190? 

I then tried the same mission with the Fw190F-8/Pb carrying only 12-78mm rockets. Once again when I shot down one of the Fw190s, the canopy did
not drop away from the Fw190, the pilot jumped out through the canopy. I also noticed that after I damaged the first Fw190, and engaged the
leader, that there was bullet hole damage on this first plane. After I engaged the damaged Fw190 again, the bullet hole damage had disappeared!!??  ???

What to make of this? I don't know..Any ideas? Rather odd, don't you agree?
Other wise, I enjoy flying all of these Fw190s.
Thank you for your attention
Horrido!

[Fresco23]

works for me as well, this is the second thing I always install, and is among my favorite mods! 

[bestekampfpilot58]

Hey Stefan,

Within the last 10 minutes I re-flew the same mission, with the same results, even though I did not use 2048 textures on any of the planes.
This time I knocked out the engine on the lead Fw190, so he had to crash land. Then I watched as the pilot once again jumped through the
canopy of his Fw190?  What!!   
I have my 3.1 selector set for 1024 ram, and as I stated none of the planes used 2048 textures. So, it must be another mod conflict, some where?
I will try the other Fw190s in the game, the ones that did not come with your mod, and see if the same effects happen with them. Sorry to bring
bad news..
Horrido!

[bestekampfpilot58]

Hi Stefan,

OK, this will be my last report on this problem. I flew the same mission again, only, this time without your Fw190 mod. I used 2 P47's, 2048 texture, and 2 FW190-A-8 2048 texture, with 2 FW190-A-9 2048 texture. Everything ran just fine. One Fw190 pilot blew his canopy off and bailed out. One Fw190 took a heavy burst, his wheels dropped down and he tried to land at high speed and blew up. One Fw190, blew his canopy, but dove into the ground with out bailing, and the last one after damaging my wing-man flew away heavily damaged. No errors of any sort. So, the error must lie with your Fw190 mod conflicting with another one of my mods? 

One way to 'fix' this is to omit your mod, or go through a possibly long progression of determining mod conflicts. I could also just play the game as it is, since it is not that big a deal. If you have any ideas on this please let me know. 
Thanks again.
Horrido!

[rickster]

This mod flies great except that I can't fly the D-11,and D-13 fighters.All I get is the horizon.I also fly the Ta152H4 and H5 mods.I wonder if there would be a conflict there.

[BravoFxTrt]

Check your log Rickster

[str34]

 I can't fly the D-11,and D-13 fighters-All I get is the horizon but  mod is great. thanks:)