Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[benitomuso]

Updated link. Latest versión with full operative parameters detailed here (the rest are autosaved values, these are the ones you can adjust by yourself):

Code: [Select]

//0.0001..1 - By PAL, Inertial Factor, Position in External View
PAL3DFollowInertia=0.01
//0.0001..1 - By PAL, Inertial Factor, Angle in External View
PAL3DFollowInertiaAngle=0.01
//0.0001..1 - By PAL, Inertial Factor, Mouse Response in External View
PAL3DExternalSoftView=0.075
//0.001..1 - By PAL, Soft Movements inside cockpit:
PAL3DCockpitSoftView=0.075
//0.0001..1 - By PAL, Soft Movements for Gunners:
PAL3DCockpitTurretInertia=0.001
//By PAL, determines if the TrackIR is used in External View (default disabled)
PAL3DExternalTrackIR=0
//By PAL, determines if the Mouse has Inertia in External View (default enabled)
PAL3DExternalMousseInertia=1
  The stated are recommended values.

  Regards,
                          Pablo

[WindWpn]

Nice!  Tried it on a few HSFX 7 4.121 and 4.122 online servers and it works like a champ! 

~S~
wind

[BravoFxTrt]

Yep, Lovin it, Thanks again Pablo

[PhoenixOrion]

Would it be difficult to get this to output as interlaced for 3d tv's benitomuso? I did use Trid-Def for a little while but I can no longer seem to get it to work. Maybe a 4.12 thing? I would like to see this as interlaced though possibly at 60fps?

[benitomuso]

It is posible I think.

  I can figure out some ways of achieving that. But it requires too much effort and hours of development to make it work properly.

  Sorry but for me it doesn't worth the effort.

  Regards,
                           Pablo

[PhoenixOrion]

It is posible I think.

  I can figure out some ways of achieving that. But it requires too much effort and hours of development to make it work properly.

  Sorry but for me it doesn't worth the effort.

  Regards,
                           Pablo

So what developer tools do I need to start working on it.

[PhoenixOrion]

People,
                    sorry but I have been quite busy lately.

  Thanks for all the congratulations and encouraging comments.

  A couple of specific answers:

 

Thank you santobr – now it works.    Now I can say too finally ‘well done – benitomuso and the SAS Team – Thank you!!!
Is there any opportunity to get polarized(interlaced)-3D for my 3D-Display.   With TriDef-3D it works by using an opengl32.dll but not really good. I’ve a ATI-Card.
Greetings Avisdiagonalis

This MOD Works on the principle of alternating frames (one for the left eye, the next for the right eye). In the anaglyph mode typically used, both images are mixed up to show to your eyes a stable image.

It can easily be sent as two completely independent frames in full color that will produced an image with phantom to your eye because the fast alternance). If your Monitor set, your video card or whatever could interlace it, you are done.

The so called "Mode C" of the Stereo feature works with two separate buffers (left and right) that can be sent by a video card to a 3D monitor (in any possible format for it). But the problem is that few and only expensive cards have this feature of "real stereoscopic infrastructure".

Regards,
                          Pablo

A card that is capable of this can be bought for $30 dollars now. But I'm not sure how well.

XFX HD-545X-ZQH2 Radeon HD 5450 1GB 64-bit DDR3 PCI Express 2.1 x16 HDCP Ready Low Profile Ready Video Card.

[PhoenixOrion]

Also a 3d monitor can be bought for $149. HP 2311gt Black 23" 5ms HDMI Widescreen LED 3D Monitor 250 cd/m2 DC 3,000,000:1 with 3D glasses. For less than $200 someone could have 3d monitor and card. You can get a 3d tv now 42 inch for $498. VIZIO E420d-A0 42" 1080p 120Hz Class (3.32" ultra-slim) LED 3D Smart HDTV.

[benitomuso]

A card that is capable of this can be bought for $30 dollars now. But I'm not sure how well.

XFX HD-545X-ZQH2 Radeon HD 5450 1GB 64-bit DDR3 PCI Express 2.1 x16 HDCP Ready Low Profile Ready Video Card.

No,
             you are speaking about a very basic and simple card that could play 3D movies, etc. A card like that working with Il-2 even in a powerful computer, will perform in mono quite undecent in FPS.

  These are the cards with real quad-buffers (two sets of them one for each eye):

http://www.nvidia.com/object/quadro_pro_graphics_boards.html

  Those are the ones that compose separate rendering frames in two different memory spaces, and later, having them completely independent, render the frames to you in several format 100% by hardware, so no impact at all in you programs. $30 dollars? LOL. More than $800? That's a normal value.

  Generating interlaced video in a standard card seems to be easier than generating side to side or up-down stereo in Il-2. It could be optimized to have a "quite low" impact on FPS. But from the papers to work a lot of effort is required.

  Regards,
                       Pablo

   Regards,
                           Pablo

[WindWpn]

Quite impressed with this mod!  I have been flying with it a few days and tweaked a little for TrackIR support.  I am running Mode C with a GTX 670 with no need for glasses. 

Just flew a GhostSkies campaign mission last night and this server is running 4.11/HSFX 6+ expert thus the mod would not work (could not choose an airbase).  I disabled and flew GS without the 3D and really noticed the difference!  The perception felt "flat" even though before the mod things appeared great with perceived feel of 3D.  However, now with this mod, much better and hard to go back to without!

I have tested this mod on other online servers running 4.12+ with HSFX 7 and it appears to work well.  Both CRT2 required compliance and not. 

All in all, excellent addition and visual experience both online and off... One of the top, if not the top mod out there!

~S~
wind

[santobr]

Hi, Pablo.

My card has real quad-buffers, it is a HD6950, but I think the way the program recognizes this feature is only for nVidia cards.
Well, in the begining of the AMD HD3D technology it was only for Direct X mode, but I found some discussion in AMD foruns saying that the last drivers enable quad-buffers for OpenGL.
If you have some time, take a look at the discussion here:
http://devgurus.amd.com/thread/158704


Thank you for this fantastic mod.



santobr.

[benitomuso]

Now it's perfect!
There is no more problems when we have water in the screen.


About 3D TVs, the mode B almost works in alternate frames 3D mode of my TV.
The only problem is that I can't sustain more than 60 FPS all the time, so, the image changes from left to right all the time.
Mode C doesn't detect my ATI HD6950 and the mode D only shows the left image.
I hope some day we could enjoy the 3D effect with our cheaper 3D TVs, we are almost there.


Thank you, Pablo, this mod is fantastic, fantastic indeed.



santobr.

Santo,
                as far as I know, there are some signals that can be sent by HDMI to let the TV set (a 3D google syncrhonized one) to know ehich one is the left and which one is the right frame.

  Not reaching the 120Hz of refresh rate most of the TVs require will lead to some flickering, but  theorically a "quite decent" image could be seen.

  I don't think it would be posssible to find a universal wasy of letting any video card know how to individualize which frame is being transmited to the TV set / monitor.

  Regards,
                             Pablo