Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[stoney69]

What mesh file must I use (copy/rename) to get the B-25D-20NC to show in QMB. I'm still having a "no show" issue as others here. Thanks.

[<Gunny>]

I just installed these planes and they all show in QMB.....

My game is 4.12.2 + MA 5.3
Maybe try a reinstall.. Some times down-loads get screwed up ,so to say.......

[stoney69]

Thanks Gunny, I'll try again.

[stoney69]

Nope, I re-D/L twice and still a no show on the -20NC. Same log issue in (INTERNAL ERROR: Can't open file '3DO/Plane/B-25D-20(USA)/Detailing.msh). All the other 25s in the D/L show fine.

[<Gunny>]

 That is strange and I don't know what to tell you...

[Epervier]

I searched in many places... and I couldn't find any B-25 that uses this mesh (Detailing.msh)! 
Are you sure you don't have a Mod that interferes with your B-25s?

[stoney69]

None that I can identify Epervier. I am HEAVILY modded though, so could be. My log is virtually identical to boogabooga's

[Flamer50]

The problem is with PA_jeronimo's  Cowling Engines & prop mod(412) for the B-25D-20.
If you are using that mod, open the folder and find the B-25D-20(Multi) and B-25D-20(USA)
folders and delete both folders.
You will then have the -20 back. This particular problem has been around for quite some
time.

If you want improved props and cowlings for the -20 you will have to find an older version
of 'jeronimo's mod(no hier.him).

If you are not using 'jeronimo's 412 mod then you are going to have to use the old "hunt and peck"
method to find the conflicting mod.

Good Luck
Bwf.

[stoney69]

Heart felt thanks Bwf, that did work! 

[Flamer50]

Heart felt thanks Bwf, that did work! 

 

[Hubberranz]

B-25D-20NC with engine mod.

Part 1   ( detailing, Post #51 of stoney69 )
..for error code:

Code: [Select]

[6:30:25 PM] INTERNAL ERROR: MeshObj: Can't load mesh 3DO/Plane/B-25D-20(Multi)/Detailing.msh
...in files B-25D-20(Multi + USA), edit BOTH hier him from:

Code: [Select]

[Detailing]
Mesh Detailing
Parent _ROOT_
Attaching 0 -1 0 1 0 0 0 0 1 -2.8515 0.0009 0.38949
to

Code: [Select]

//[Detailing]
//Mesh Detailing
//Parent _ROOT_
//Attaching 0 -1 0 1 0 0 0 0 1 -2.8515 0.0009 0.38949
----------------------------------------------------------------------------------------------

Part 2  ( = post #16 )

I was able to add Jeromino's new 3D engines to these birds!
https://www.mediafire.com/download/vukistwnwa31d8c/Modded+B-25s+Engine+Fix.rar

This as offered wont work for this plane. The link does not feature the Textures file included in full 4.12 Stock_fix Cowling Engines & prop.
As per engine.mat in the file:

Code: [Select]

[Layer0]
  TextureName ../TEXTURES/MechaCommonP47.tga
  tfMipMap 0
  tfTestA 1resulting error:

Code: [Select]

[6:38:13 PM] INTERNAL ERROR: Can't open file '3DO/Plane/TEXTURES/MechaCommonP47.tga'
[6:38:13 PM] WARNING: object '3DO/Plane/TEXTURES/MechaCommonP47.tga' of class 'TTexture2D' not loaded
Add Textures file from the original mod. Put this file in plane file, ONLY if you do not have the"full" engine mod already installed.
Textures:     https://www.mediafire.com/file/qdr97c1z5w2bf13/TexturesEngineMod.7z/file

----------------------------------------------------------------------------------------------

Part 3  ( about landing lights, suggested in Post #18 )

...
Landing lights for the B-25's
https://www.sas1946.com/main/index.php/topic,41992.0.html
Best regards,
Piotrek

- Attention to loadout  8x250lb. Bombs. (  Almost every models but a few ).
- If you look at the picture above, you will see the 8 underwings bombs; these are not available with the landing lights mod.
- probably there is some missing hooks in the proposed new wing msh's for the lights.

[Flamer50]

Hubberranz,
Thanks for the "[Detailing]" fix. PA_jeronimo's 409 and HSFX packs have same
problem with the  B-25D-20(Multi + USA). The DBW pack is O.K.