Slot with new flight model complete:https://www.mediafire.com/download/gxd86d7aa0ppq68/RE-2005+July+19th+v2.rar
Landing gear has been fixed. The pivot points on the GearL2 and GearR2 were orientated wrong, that is what was causing the gear
to lean to the rear. I have added additional gear meshs from the Hellcat to give additional pivot point. Gear now appears normal.
Also, some of the gear meshes had to be rearranged in the heir him to place L parts on the left and R parts on the right.
At this point slot is done and all gear and doors open and are synchronized .
What needs to be done. Tail wheel bay interior has no mesh, so when gear is open, looking inside is a void.
As mentioned above, clips need to be adjusted so the nose does not sink into the ground when plane crashes.
Unsure where indentations for MGs on cowling hood are mapped on skin, they appear interior green.
CW