Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[{64s}Takeshi]

I will try, thx.

[creature]

  Say Creature,
I read somewhere on this forum that if you deleted the Wide_ from the wide_ background in the  !0000DOF\gui  folder
It would make them visible for some with res issues.

Sir Rod:

You are a good man!!

For those of you haveing trouble with the load screens, Sir Rods research did the trick for me in all the modules

Thanks

c

[CPVAF_wawa]

Someone try this mission in jets era and check why i have CTD after some minutes . Error is 6DoF stop to work

are you activated Japancats Effects in JSGME? It should be disabled.

I like Japancats Effects too, but They are in the conflict.
Hope someone to solve this problem

[PO_MAK_249RIP]

Hi tooslow your first 2 adders are brill mate - installed no probs at all, any chance you can add the twin engine Fokker (cant remember designation) to the next one??

[Gaston]

Fokker G1... already in CUP, but with cockpit problem.

[edc1]

Hi Gaston,
You are right the Fokker g1 is in CUP and the cockpit is just fine in my CUP.
Maybe you might have had a download problem that has corrupted the file.
Cheers edc1(Stan)

[tooslow]

I appreciate the feedback PO_MAK_249RIP.  If you see anything related to the adders that should be fixed please let me know.

Spartan18a, I haven’t even looked at the ships in WAW, all my testing has been in the QMB and have been dog fights, bomber interception, and trying out some bombers against ground targets.   Adding ships isn’t difficult; I’ve done it before for my own use.  They certainly could be included to one of my future “adders”.  The best help I could use is to know which ones are missing and would be the most useful.   As I stated before a reference showing me where the mod is located is very helpful.

I’ll be away from my computer for a week or two so don’t expect anything from me for at least 2 to 3 weeks. 

[Gaston]

Hi Gaston,
You are right the Fokker g1 is in CUP and the cockpit is just fine in my CUP.
Maybe you might have had a download problem that has corrupted the file.
Cheers edc1(Stan)

I do not think I have a corrupted download, as this problem has been mentioned several times in the original Fokker G.1 thread (see here, replies 17 and 20 for example, and solution by Skipper is here, reply #50 on: August 16, 2010, 11:49:44 AM). That is what I did, and it works perfectly.

[PO_MAK_249RIP]

OOPS! My mistake Gaston your right its there mate

[edc1]

Hi Gaston,
Thanks for that info
I have not changed anything in the fokker G1
as it was downloaded in a SFS file format of WAW in CUP, and I have no means to decompile
an SFS file to add or change anything.
so I can only assume any changes that were done, were done by the CUP team, before it was compiled
into  a SFS file.
Which is why I thought you might have had a corrupted file.
Cheers edc1 (Stan)

[PO_MAK_249RIP]

Hi tooslow - you including Walrus and Stranraer in next pack? If so I'll hold off installing seperately

Mick

[Sir Rod]

Could someone tell me what this error means?
What is the file I dont have?   (I cannot  find in the TFM build I have either)

From the log file

Code: [Select]

[2:37:30 PM] ERROR file: File users/doe/Icons not found

I have just rebuilt CUP form Torrent files instead of downloads from Mediafire - but this error persists.
IF it is possible to post the missing Icon file - I would be most appreciative.
Thanks