Special Aircraft Service

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: F4U-1 interior problem?  (Read 1523 times)

0 Members and 1 Guest are viewing this topic.

Plowshare

  • Modder
  • member
  • Offline Offline
  • Posts: 639
F4U-1 interior problem?
« on: February 25, 2017, 01:52:38 PM »

Hi all:

Not sure this is the place but here goes:

There seems a problem with the interior of the F4U-1 Corsair and the British Corsair 1. Here's two screenshots comparing the F4U-1 and the F4U-1A:

F4U-1:

Note that it looks like there has been a piece taken out of the instrument panel and the stall warning light has slipped forward under the sight base. It also looks like the sight has been shimmed with a piece of cardboard. I realize there are different sights on the two planes but the base just doesn't look quite right to me.

F4U-1A:



Bob
Logged

SAS~Tom2

  • SAS Honourable Member
  • member
  • Offline Offline
  • Posts: 7954
  • no sweat
Re: F4U-1 interior problem?
« Reply #1 on: February 25, 2017, 03:28:01 PM »

As a sort of bad advert, you could test what I did on the Corsair pits.. but I doubt it changes what you mean.

https://www.sas1946.com/main/index.php/topic,46361.84.html

Can be tuned as for options, as for the sight, TBH no idea. Maybe it helps, sorry if not. I did a little research back then and indeed the later Corsairs have a rather big glass sight covering much of the front...yet that was not the focus of my mod and so I suppose the solution is somewhere else.
Personally, I am not a gunsight expert at all. Except maybe for Mustangs by now a bit and ironically I stripped most sights off my Stang pits for my airshow racing offline flying hobby.

Good Luck with your quest!  :)

Cheerio

Thorsten


Logged

Plowshare

  • Modder
  • member
  • Offline Offline
  • Posts: 639
Re: F4U-1 interior problem?
« Reply #2 on: February 25, 2017, 06:50:42 PM »

Tom:

Thanks for your suggestion but, if you go your link and look at Reply #52 on page 5 and scroll down to the fifth picture you can actually see what I see as it's a picture from inside the F4U-1.

I'll keep trying things out from here but I don't really know what I'm looking for.

Bob
Logged

Plowshare

  • Modder
  • member
  • Offline Offline
  • Posts: 639
Re: F4U-1 interior problem?
« Reply #3 on: February 26, 2017, 01:52:44 PM »

Found an old screenshot of the F4U-1 sight from a heavily modded 4.12.2:




Hope this helps.

Bob
Logged
Pages: [1]   Go Up
 

Page created in 0.035 seconds with 24 queries.