Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Mick]

... small fix, courtesy of Epervier, not to be able to see the sky according to the angle ...   

Visual glitch, you can see the sky behind the MG :



Visual glitch fixed :



FIX :

1) Open the hier.him

2) Scroll down to section

[Tail1Int_D0]
Mesh Tail1Int_D0
Parent Tail1_D0
Hidden
Attaching 1 0 0 0 1 0 0 0 1 0 0 0

3) Delete line "Hidden" and save & exit

 

[stanislao]

    Yes! Very good now the gunners are well positioned and the transparency inside the fuselage has disappeared!   Thank you. 

 

[gunny0134]

For dear Mick...!

To add cockpit dash and yoke in 'B-24D 140 CO'...!!

Just put the files into the folder of B-24D 140 CO, and add the position values below to hier.him.

[Dash]
Mesh Dash
Parent CF_D0
Attaching 1.3 0 0 0 1.3 0 0 0 1.3 0 -2.87 -0.45
[Z_AroneL2]
Mesh Z_AroneL2B24
Parent CF_D0
Attaching 1 0 0 0 1 0 0 0 1 0.45 -4.58763 0.19
[Z_AroneR2]
Mesh Z_AroneR2B24
Parent CF_D0
Attaching 1 0 0 0 1 0 0 0 1 -0.45 -4.58763 0.19
[pipeL]
Mesh pipe
Parent  Z_AroneL2
Attaching 1 0 0 0 1 0 0 0 1 0 -0.105516 -0.00535229
[pipeR]
Mesh pipe
Parent  Z_AroneR2
Attaching 1 0 0 0 1 0 0 0 1 0 -0.105516 -0.00535229

내려받기 = download

http://naver.me/G1FoU7tS

Thank you always...!!!

[Mick]

... many THX, gunny0134, any improvement is much welcome ...! 

Now I need a break, because I put quite a lot of work in this B-24D, but once I have recovered, maybe the next steps could be the RAF H, L and S ... 

[stanislao]

    OK guys, how about placing a summary link of this splendid two-handed work on B-24 ?     

[Mick]

... not a bad idea, here is the version I use, that includes every fix/improvement about the B-24D ... 

https://www.mediafire.com/file/ozxcpk41u0z71mh/B-24D+Mick.7z/file

[coberrick]

Wondering if I could humbly request an adaptation of the b-24d crew to the J model, please? I’ve managed to port over most of the crew and am just struggling with the nose turret/bombardier positions right now. Many thanks to all for your efforts with these wonderful models. Cheers!

[gunny0134]

and am just struggling with the nose turret/bombardier positions right now...

I think it will probably be very difficult without the support of RAF !!

e.g : my B-24J-100-CF(USA)

[BIGREDONE]

please I would like to ask, if anyone has managed to install the P38 pilots on BAT in any version....... , I have tried them all included with the correct folder name search by 3do/plane path with the DUMP of the il2 selector 

[gunny0134]

I think Barnesy's P-38s version is much better.

If you want to take Ranwers' pilot there (though you don't have to...), see first page.

[BIGREDONE]

If you want to take Ranwers' pilot there (though you don't have to...), see first page.

yes of course, ....but it's just the version I'm trying to install, version taken from the first page of yours post the one that you just told me, but I can't install it on my version of BAT (4.1.2) , in fact I was wondering if someone else had been better than me and had managed to install it succerfully.

[gunny0134]

....but it's just the version I'm trying to install, version taken from the first page of yours post the one that you just told me, but I can't install it on my version of BAT (4.1.2)

Ranwers' P-38 file on the first page can only replace the pilot of Barnesy's P-38s...of course, we'll have to revise that a lot, too.

In other words, it's completely different from the P-38s on BAT. For P-38s of BAT, we need to do separate work using Ranwers' file.

Can you use 'dump mode' ?? If you can, dump one P-38 model you want and put the file (ex: P-38***(USA)) in the 'Pilots USA ETO' folder of Ranwers.

After you do this, ask for an explanation again.

And I am not an English speaker. There are many difficulties in writing & reading English. Please understand this point first.