Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Epervier]

Has anyone successfully applied a new 3D pilot model to the BF110 family?
If you have, please share the information.
I gave up because I couldn't do it.

My environment : 4.12.2m, SAS 5.30

- Hello doctor! I'm sick!
- Ah! What are the symptoms?
- I don't know! You're the doctor!

With so much information you don't expect to be cured?
Some explanation of your pain... an explanatory screen would be welcome... no?

[gunny0134]

My problem with the Bf-110 family was that the QMB didn't load the plane (not CTD).

So I targeted Bf-110C-1 and started testing (because now I knew everyone else was working well).

The test method was repeated until the Bf-110C-1 could not be loaded on the QMB, adding files one by one from the corresponding plane folder of the new 3D Luft Pilots.

Then, when 'Pilot2_D1.msh' was added. The QMB did not load the plane.

So I just decided to use the old file for 'Pilot2_D1.msh' (now the uniform colors of the two pilots are different when the bail-out).

It is now normal and has been installed with stick.

Bf-110C-4 shows the same phenomenon. Then maybe the rest too.

I don't know why this is happening...

If anyone has symptoms similar to mine, please refer to it.

[jedeash]

Hello looks great but is this normal
The Dornier keep the old pilots
3 screens from the same mission

[stanislao]

   If I understand correctly, would you like a "Ranwers" crew also on the all Dornier bomber series ...?

[Mick]

... there's a Dornier 217_K1 folder in Ranwers Luftwaffe Pilots pack ... 

[Knochenlutscher]

No issue with all Bf-110 in SAS Mod Act 5.30 and VP Mod Act.

Everyone seems to be working well...!

Am I doing something wrong?

But I don't know what it is...
[/quote]

Get yourself Goggles, learn to Read our Forum Rules, first.

GO TO TECH HELP, NOW!!!

Again, this is a friendly reminder.

Thanks a bunch...

[gunny0134]

Get yourself Goggles, learn to Read our Forum Rules, first.
GO TO TECH HELP, NOW!!!

TECH HELP ??

If I go there, what advice can I get about the problem of planes that the new Ranwers's pilot model does not apply to.

I managed to solve the problem of the Bf110 family by spending a lot of my time alone.

It has already been mentioned by some users that Bf110 family doesn't work well.

Was there any advice on such a thing?

If you want to give me advice, at least give me some information or clues.

Even if I don't go there Tech Help, I have the ability to control it if I'm given a clue.

[ssn637]

I couldn't get the BF-110 variants to work in BAT 4.2.1 either, but will give gunny0134's method a try when I get a chance. 

Already excluded the 'Pilot2_D1.msh' from Ranwer's update but still couldn't load the BF-110 C1/C4 in a QMB, so I'll try to add each file one by one as gunny0134 did and will report back here if I have any luck.

Cheers

Geoffrey

[gunny0134]

I couldn't get the BF-110 variants to work in BAT 4.2.1 either

My environment : SAS 5.30, BAT 4.0 Red Core - 2 mod using

'Bf-110_Family for 4.12.1_Ver.2', 'BF110G4_SAS_v4' installed and their's hier.him file using

now, SAS - C1, C4(C1 hier.him using) ok
        BAT - C1, E1 ok, C4...loaded ok but CTD occurs at the end of the mission. G4...loaded ok but problems of stick and middle position pilot hmask.

The other planes aren't in a hurry right now, so I'm putting them off.

I hope it will be resolved well...

[Ranwers]

Crew for Do-17 

https://www.mediafire.com/file/xsdy6clottnrzw1/Do-17_Z2.rar/file

[stanislao]

   Excellent .. Excellent! Thank you !   

[Knochenlutscher]

Even if I don't go there Tech Help, I have the ability to control it if I'm given a clue.

Where  is your LOG and Tech Help Entry?

Gunny, I say it again, if you don't move your stuff to here, we both get friends.

https://www.sas1946.com/main/index.php/board,4.0.html