Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[stanislao]

   In USA Skins  perhaps ?  ...........

[Vasya]

   In USA Skins  perhaps ?  ...........

Thank you!
I won't find it myself.

[dona]

Hi
if u search US skins you should find Vampire's set for VF-1B Tophatters and my Curtiss Hawk II skins from the beginning of the year that covered most foreign operators. As with Stan's skins, they are all compatible with the new Goshawk. 

[Vasya]

Thank you!

[semperaggressus]

Some suggestions for skins:

[dona]

Some of these skins are covered in the foreign Goshawk pack I mentioned above. Other Leticia conflict skins can be found by searching "Leticia" there is large pack in the skin shop section and "Curtiss Floats on the Putamayo" in the US skins section.

[Mixx]

Very nice plane and beautiful skins!
Thanks to 101tfs, Stanislao and Dona for this gift!
Thanks to Frankiek, WxTech and Vasya for improvements and additions to Curtiss F11C

[Vasya]

.................
Thanks to.......... and Vasya[/u] for improvements and additions to Curtiss F11C

The motor in my "corrections" does not work accurately. 
When setting up the motor, I looked at the tachometer in the cockpit of the Hawk-2.
The tachometer - as it turned out - does not work correctly - it underestimates the speed.
After correcting the operation of the tachometer, I will correct the operation of the motor for Hawk-2.

[stanislao]

   Bravo Vasya, your intervention is always appreciated!   

[Vasya]

This is how it more accurately shows the speed and boost. 
Now you can tweak the motor settings.

Code: [Select]

super.mesh.chunkSetAngles("zRPS1a", 0.0F, floatindex(cvt(fm.EI.engines[0].getRPM(), 0.0F, 2200F, 0.0F, 10.7F), rpmScale), 0.0F);               
super.mesh.chunkSetAngles("zManifold1a", 0.0F, floatindex(cvt(((FlightModelMain) (super.fm)).EI.engines[0].getManifoldPressure(), 0.4F, 2.243F, 3F, 16F), manifoldScale), 0.0F);
 Update fm and cockpit class put on aviaskins.

[gunny0134]

Can I get the SSP of this cute plane for BAT 4.0 ~ 4.1 ??

[Frankiek]

To cater for the 409 rebel needs you can find here an adaptation for 4.09 (working also in 4.10)

It needs DiFFM and I have modified the bomb used so that it can be easily installed in any  409 with the only addition are the classes and 3d of the 30gal Droptank

Classes,cod and FM are included in the folder classes.

Credits: 101tfs for the original 3d model, Vampire Pilot and Mike "Storebror" for their BAT and UP adaptation, Wxtech for shading some ligth and the new ring sight, Stanslao for advocacy and all the usual suspects behind IL-2

I have added the download link to the first post

Enjoy