Topic: B-18A Bolo Freezes when throttle increases (Read 383 times)

MGGUY · « **on:** January 10, 2023, 01:34:16 PM »

Hi there.

B-18A Bolo is keep freezing when I try to increase the throttle more then 90%.

cbradbury · « **Reply #1 on:** January 10, 2023, 02:23:17 PM »

Just did a test in QMB - perfectly fine in my up-to-date BAT. Log?

WxTech · « **Reply #2 on:** January 10, 2023, 03:30:23 PM »

Are you using a full throttle smoke mod?

Not long ago another one of our peeps reported a similar problem for another plane, and I recall the problem was due to the full throttle smoke mod...

MGGUY · « **Reply #3 on:** January 10, 2023, 03:38:36 PM »

@WxTech yes! I used your full throttle smoke mod! I just unloaded & tested it and looks fine now... I hope this issue fixed well mate!

WxTech · « **Reply #4 on:** January 10, 2023, 07:06:23 PM »

It seems that only a very few planes suffer from this issue. It's too bad that those handful (well, two so far that I'm aware of, out of hundreds) should cause one to have to lose out on the throttle smoke effect. Actually, my mod includes also the generation of smoke for certain affected engines when suffering carb flooding under negative G.

Author Topic: B-18A Bolo Freezes when throttle increases (Read 383 times)

MGGUY

B-18A Bolo Freezes when throttle increases

cbradbury

Re: B-18A Bolo Freezes when throttle increases

WxTech

Re: B-18A Bolo Freezes when throttle increases

MGGUY

Re: B-18A Bolo Freezes when throttle increases

WxTech

Re: B-18A Bolo Freezes when throttle increases